We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round blue LED warning light with clear polycarbonate lens and wire leads

Maxxima

Maxxima M20380BCL-SP Blue LED Auxiliary Warning Light

SKU CH-NFN4-0GVK3

Blue LED auxiliary warning light, SAE J595 Class 1 rated with IP67 protection for permanent 12 V DC installation

  • ColorBlue
  • MaterialHAWA
  • Blue LED flashes to alert traffic
  • SAE J595 Class 1 rating meets safety standards
  • IP67 sealed against dust and water
  • 12 V DC power suits vehicle electrics
  • 1 13/16 in round polycarbonate lens

Purpose-built warning light

The Maxxima M20380BCL-SP is a perimeter flashing warning light with a blue LED output and clear polycarbonate lens. It meets SAE J595 Class 1 requirements for auxiliary vehicle lighting and carries an IP67 rating for dust and water ingress protection. The unit installs permanently via wire leads on any universal 12V DC system and draws 500 mA during operation.

Thermal noise and power

LED technology keeps heat output low and the sealed housing runs silently without moving parts. At 12V the light draws a steady 500 mA, so electrical load is minimal on vehicle charging systems. The IP67 enclosure prevents moisture or debris from affecting performance in normal outdoor use.

Installation and compliance

Wire leads allow direct permanent connection without extra harnesses or controllers. SAE J595 Class 1 certification confirms the flash pattern and intensity meet recognised safety standards for auxiliary warning applications. The clear lens and blue LED combination is restricted in some jurisdictions, so verify local regulations before mounting.

Highlights

  • Blue LED flashes to alert traffic
  • SAE J595 Class 1 rating meets safety standards
  • IP67 sealed against dust and water
  • 12 V DC power suits vehicle electrics
  • 1 13/16 in round polycarbonate lens

Specifications

ColorBlue
BrandMAXXIMA
MaterialHAWA

Questions about this item

How do I permanently mount the 1 13/16 in diameter light and wire the 12V DC leads?

Drill a hole matching the 1 13/16 in round body, secure the polycarbonate housing, then connect the wire leads to a fused 12V DC circuit; the step often missed is adding an inline fuse at the power source.

What maintenance will the IP67 rated LED module need over time?

The sealed IP67 housing requires no internal service; only periodic external lens cleaning with mild soap and water is needed to maintain the blue flashing output.

At what point does the SAE J595 Class 1 flash pattern become non-compliant during continuous operation?

The light draws 500 mA at 12V DC and meets SAE J595 Class 1 when correctly powered; voltage drop from undersized wiring is the first limit that reduces flash intensity below the standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.