maximm
maximm Cat 6 Ethernet Cable 8 ft 6-Pack 2 in 1 Accessories
Six Cat 6 patch cables with gold-plated RJ45 connectors, 550 MHz bandwidth and 10 Gbps speed for reliable wired networking
- Reliable 10 Gbps throughput supported by 550 MHz bandwidth
- Reduced crosstalk from UTP four-pair design with separator
- Durable connections via gold-plated RJ45 contacts and snagless boots
- Standards-compliant build meeting ANSI/TIA-568-C.2, REACH and RoHS
- Six eight-foot cables ready for PC, router, switch or NAS
8 ft Cat 6 cable pack
This pack contains six grey Ethernet patch cables, each eight feet long. They use 24AWG copper-clad aluminium conductors with HDPE insulation and a PVC jacket. Gold-plated RJ45 connectors feature a moulded snagless boot and strain relief. The unshielded twisted-pair design includes a separator to reduce crosstalk.
Suited for wired LAN connections
These cords suit anyone wiring PCs, laptops, servers, printers, routers, modems, switches, streamers or NAS devices. They support 10BASE-T, Fast Ethernet, Gigabit Ethernet and 10-Gigabit Ethernet up to 550 MHz bandwidth. Buyers who need shielded cable for noisy environments or longer runs should look elsewhere.
Simple plug-and-play install
Push each connector into an RJ45 port until it clicks; the snagless boot protects the tab during removal. No tools or software are required. The most common issue is a loose fit if the port latch is worn, which can cause intermittent link drops.
Highlights
- Reliable 10 Gbps throughput supported by 550 MHz bandwidth
- Reduced crosstalk from UTP four-pair design with separator
- Durable connections via gold-plated RJ45 contacts and snagless boots
- Standards-compliant build meeting ANSI/TIA-568-C.2, REACH and RoHS
- Six eight-foot cables ready for PC, router, switch or NAS
Specifications
No published specifications for this item yet.
Questions about this item
What devices need RJ45 ports to use these 8 ft Cat 6 cables?
Any PC, laptop, server, LAN printer, router, modem, switch, media player, streamer or NAS with a standard RJ45 jack will connect directly.
Will the 550 MHz bandwidth and 10Gbps rating work with my older 100BASE-TX and 1000BASE-T gear?
Yes, the cables support 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T, so they run at the highest speed each legacy device allows.
How can I verify the 6-pack is performing at the rated 550 MHz and 10Gbps after installation?
Run a link-speed check in your OS or router UI; it should show 10 Gbps on 10GBASE-T ports or 1 Gbps on Gigabit ports, confirming the cable meets spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



