maximm
maximm Cat 6 Ethernet Cable 40 ft 12 Pack Gray 2 in 1 Accessories
Twelve 40 ft Cat 6 patch cables rated for 10 Gbps at 550 MHz with gold-plated RJ45 connectors and snagless boots
- 12-pack gives you spares for every room
- 40 ft length reaches distant ports without slack
- 550 MHz bandwidth supports 10 Gbps transfers
- Gold-plated RJ45 contacts resist corrosion
- Snagless boots protect tabs during frequent moves
12-Pack 40 ft Cat 6 Cables
This 12-pack supplies 40 ft gray Cat 6 patch cables for wiring multiple devices in a home or office network. Each cable uses 24AWG copper-clad aluminum conductors with HDPE insulation and a PVC jacket. Gold-plated RJ45 connectors feature molded snagless boots and strain relief. The UTP design includes a pair separator to reduce crosstalk.
Sustained 10Gbps Throughput
The cables are rated for 550 MHz bandwidth and support 10GBASE-T up to 10 Gbps alongside 1000BASE-T and 100BASE-TX standards. ANSI/TIA-568-C.2 compliance ensures consistent performance across the full 40 ft length during prolonged data transfers. The twisted-pair construction with separator maintains signal integrity under continuous load without degradation.
Passive Operation Zero Noise
As passive copper cables they draw no power and produce no audible noise during operation. The PVC jacket and molded boots protect the conductors from physical stress in normal routing scenarios. REACH and RoHS compliance confirms restricted substance limits are met. The 1-year warranty covers manufacturing defects. Builders needing shielded cables or longer single runs should look elsewhere.
Highlights
- 12-pack gives you spares for every room
- 40 ft length reaches distant ports without slack
- 550 MHz bandwidth supports 10 Gbps transfers
- Gold-plated RJ45 contacts resist corrosion
- Snagless boots protect tabs during frequent moves
Specifications
No published specifications for this item yet.
Questions about this item
Does the 24AWG copper-clad aluminum cable get warm or draw extra power during continuous 10Gbps transfers?
The cable is passive with no active electronics, so it produces no heat and draws no power; any warmth would come only from the connected ports.
What devices must already have RJ45 ports to use these 40 ft gray patch cords?
Any equipment with standard RJ45 jacks — PCs, laptops, servers, printers, routers, modems, switches, streamers or NAS units — will connect directly.
Will the 550 MHz, 10GBASE-T rated cables work reliably with older 100BASE-TX or 1000BASE-T gear I still use?
Yes, they are backward compatible with 10BASE-T, 100BASE-TX and 1000BASE-T/1000BASE-TX, so legacy devices operate at their rated speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



