We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifty white Cat 6 Ethernet cables with gold RJ45 connectors and snagless boots

maximm

maximm Cat 6 Ethernet Cable 25 ft 50 Pack White 2 in 1 accessory

SKU CH-KFN3-9SCCN

A 50-pack of 25 ft Cat 6 patch cables rated for 10 Gbps at 550 MHz with snagless gold-plated connectors

  • Supports 10 Gbps speeds with 550 MHz bandwidth
  • Reduces crosstalk using UTP twisted pairs with separator
  • Durable snagless boot protects connectors during installation
  • Meets ANSI/TIA-568-C.2 and REACH/RoHS standards
  • 50 cables at 25 ft each for large deployments

50-Pack Cat 6 Cable Kit

This pack supplies fifty white Cat 6 patch cables, each twenty-five feet long, for wiring multiple workstations, servers or network devices in a single deployment. The UTP construction uses 24AWG copper-clad aluminum conductors with HDPE insulation and a PVC jacket, meeting ANSI/TIA-568-C.2, REACH and RoHS requirements. Gold-plated RJ45 connectors and a molded snagless boot protect the latch during repeated insertions.

Push-in connectors with snagless boots

Installation is a simple push of each RJ45 plug into a compatible port until the latch clicks, and the snagless boot stops the tab catching on adjacent cables when pulled. The stranded four-pair design with an internal separator keeps the cable flexible for routing through trunking or under raised floors. Take care not to exceed the recommended bend radius or kink the jacket, as the copper-clad aluminum cores can fracture more readily than solid copper.

Bulk installers needing uniform lengths

The uniform twenty-five-foot length and fifty-unit count suit IT teams fitting out offices, classrooms or rack rows where every drop is the same distance. Buyers who need shielded cable for high-EMI environments, solid-conductor runs for permanent in-wall installation, or a mix of shorter and longer cables should look at alternative products.

Highlights

  • Supports 10 Gbps speeds with 550 MHz bandwidth
  • Reduces crosstalk using UTP twisted pairs with separator
  • Durable snagless boot protects connectors during installation
  • Meets ANSI/TIA-568-C.2 and REACH/RoHS standards
  • 50 cables at 25 ft each for large deployments

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 550 MHz Cat 6 cable is delivering 10 Gbps after I plug it in?

Connect the gold-plated RJ45 ends to two 10GBASE-T ports, run a local throughput test such as iperf3, and verify sustained speeds near 10 Gbps with low packet loss.

The listing says 50-pack — does each 25 ft cable include the snagless boot and do I need separate couplers?

Every 25 ft cable in the 50-pack has a molded snagless rubber boot and strain relief on both RJ45 plugs; no extra couplers are required for point-to-point links.

Should I choose the white 25 ft 50-pack or a different length for a 10 Gbps home run?

The white 25 ft 50-pack meets ANSI/TIA-568-C.2 up to 550 MHz and 10 Gbps; pick this length if your runs are 25 ft or shorter, otherwise select a longer Cat 6 option.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.