maximm
Maximm Cat 6 Ethernet Cable 20 ft 50-Pack Pink 2 in 1 Accessories
Fifty pink Cat 6 patch cables, each 20 ft long, deliver up to 10 Gbps over 550 MHz bandwidth with gold-plated RJ45 connectors
- Supports 10Gbps networking with 550MHz bandwidth
- 50 cables at 20ft each simplify large installations
- Gold-plated RJ45 contacts resist corrosion for reliable connections
- Snagless molded boots protect tabs during frequent reconnects
- Meets ANSI/TIA-568-C.2, REACH and RoHS standards
20 ft Pink Cat 6 50-Pack
This bundle supplies fifty Cat 6 patch cables each measuring twenty feet and coloured pink for quick visual identification. The conductors are 24AWG copper-clad aluminium with HDPE insulation and a PVC jacket. Gold-plated RJ45 plugs feature moulded snagless boots and strain relief. The cables meet ANSI/TIA-568-C.2, REACH and RoHS requirements.
Suits bulk installs — not single drops
Network managers wiring classrooms, labs or temporary event spaces can deploy consistent lengths in one purchase. The pink sheath helps trace runs in crowded racks. Buyers needing only one or two cables, or who require shielded construction for high-interference environments, should look at other options.
550 MHz bandwidth rating
Each cable is tested to 550 MHz and supports 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T up to the rated distance. This single figure determines whether the bundle matches the performance tier your switch ports and NICs require.
Highlights
- Supports 10Gbps networking with 550MHz bandwidth
- 50 cables at 20ft each simplify large installations
- Gold-plated RJ45 contacts resist corrosion for reliable connections
- Snagless molded boots protect tabs during frequent reconnects
- Meets ANSI/TIA-568-C.2, REACH and RoHS standards
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 20 ft 50-pack or a different length for my office runs?
The listing supplies only the 20 ft length in a 50-pack; choose this if each drop is roughly that distance, otherwise measure your runs and source a matching length.
What does the 550 MHz / 10 Gbps rating actually deliver on my Gigabit switch?
The cable supports up to 10 Gbps, but a Gigabit switch caps throughput at 1 Gbps, so you will see Gigabit speeds with headroom for future 10 GbE upgrades.
Is the TIA-568-C.2 UTP spec enough for PoE cameras and 10 GbE uplinks?
Yes, the 24 AWG copper-clad aluminum conductors meet TIA-568-C.2 for 10GBASE-T up to 550 MHz and handle PoE loads within the standard's limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



