Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940535BTC
In stock
Maxim Mfg.
Maxim Mfg. 10270 Rogue 3-Light 17" Black Flush Mount
A 17-inch black flush mount holding three E26 lamps with a twist-lock lens for simple cleaning
- typeDecorative Lighting
- sizeBlack
- Three-light design brightens larger rooms
- 17-inch diameter fits standard ceiling boxes
- Twist-lock lens allows quick lamp changes
- Black finish coordinates with modern décor
- LED or E26 incandescent options suit preference
Rogue 17" Black Flush Mount
The Maxim Mfg. Rogue 10270 is a three-light flush mount finished in black with a 17-inch diameter. It suits hallways, bedrooms or utility spaces where a low-profile ceiling fixture is preferred. The twist-lock lens allows quick access for lamp changes or cleaning without tools. Buyers needing a larger diameter or a different finish should look elsewhere.
Thermals and Power Draw
The fixture accepts standard E26 incandescent lamps or LED equivalents, so heat output and power draw depend entirely on the lamps chosen. LED lamps run cooler and draw significantly less current than incandescent options. No integrated driver or transformer is described, so thermal performance follows the lamp specification. Installers should verify the supply wiring rating matches the selected lamps.
Build and Daily Use
The steel housing carries a black finish and uses a twist-lock lens that secures without visible screws. California Proposition 65 warnings apply for chemicals known to cause cancer and birth defects. The 17-inch width covers standard junction boxes, and the flush profile keeps clearance tight to the ceiling. No emergency back-up module is included unless specified separately.
Highlights
- Three-light design brightens larger rooms
- 17-inch diameter fits standard ceiling boxes
- Twist-lock lens allows quick lamp changes
- Black finish coordinates with modern décor
- LED or E26 incandescent options suit preference
Specifications
| Brand | MAXIM LIGHTING |
|---|---|
| type | Decorative Lighting |
| size | Black |
Questions about this item
How do I install the 10270 flush mount and which step is often missed?
Mount the base to the junction box, connect wires, then twist the lens onto the base until it locks; the twist-lock step is frequently skipped, leaving the lens loose.
What maintenance will the 10270 need later?
The twist-lock lens allows easy lamp replacement and cleaning; simply twist off the lens, swap the E26 bulb or wipe the glass, then twist it back into place.
What limit appears first during sustained use of the 10270?
Heat buildup from the E26 incandescent lamps is the first constraint; extended operation raises fixture temperature, so ensure adequate ventilation and follow the 65°C ambient rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
