Maudlin Products
Maudlin Products MSA125-5 Slotted Shim A-2 2" 0.125" Pk5 hand tool
Stainless steel slotted shims, 2" square by 0.125" thick with 5/8" slot, pack of five
- TypeAngle, Pitch & Slope Locators
- Weight0.59
- Precise alignment with 0.125 in thickness tolerance ±0.003 in
- Consistent spacing using 2 in length and width tolerance ±0.015 in
- Corrosion resistance from 18-8 stainless steel construction
- Easy installation via 5/8 in slot width and tabbed design
- Ready-to-use pack of five soft annealed shims
Precision Alignment Shims
This pack contains five stainless steel slotted shims designed for precise spacing and alignment tasks. Each piece measures two inches square with a thickness of 0.125 inches. The soft annealed temper allows easy bending or trimming on site. They suit mechanics, machinists and maintenance crews needing reliable flat stock.
Dimensional Tolerance Limits
Thickness is held to ±0.003 inches while length and width stay within ±0.015 inches. The 5/8 inch slot width and 1 9/32 inch slot depth fix the maximum bolt or stud diameter that can pass through. The half-inch tab height limits how far the shim can be inserted under a clamped joint. Buyers needing tighter flatness or larger slot clearance must look elsewhere.
18-8 Stainless Steel Grade
The 18-8 alloy provides general corrosion resistance in indoor and mild outdoor environments. It is non-magnetic in the annealed condition and cannot be hardened by heat treatment. Applications exposed to chlorides, acids or sustained high loads require a different alloy.
Highlights
- Precise alignment with 0.125 in thickness tolerance ±0.003 in
- Consistent spacing using 2 in length and width tolerance ±0.015 in
- Corrosion resistance from 18-8 stainless steel construction
- Easy installation via 5/8 in slot width and tabbed design
- Ready-to-use pack of five soft annealed shims
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
| Weight | 0.59 |
Questions about this item
Which pack size should I choose for this slotted shim?
The product is supplied as a pack of five shims, each measuring 2 in by 2 in with a 0.125 in thickness.
How does the 0.125 in thickness perform once installed in an assembly?
Each shim is made from annealed 18-8 stainless steel with a ±0.003 in thickness tolerance, providing consistent spacing in the joint.
What does the 5/8 in slot width mean for bolt clearance in practice?
The 5/8 in slot width and 1 9/32 in slot depth allow the shim to fit over standard bolts while the 1/2 in tab height aids positioning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
