Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939976BTC
In stock
Master Lock
Master Lock Safety Padlock Keyed Alike Orange 1/4 In PK6
Six safety padlocks with hardened steel shackles, keyed alike and supplied with two keys and labels
- TypeSafety
- Keyed alike for fast lockout workflows
- Hardened steel shackle resists cutting attempts
- Thermoplastic body withstands chemical exposure
- Non-removable key prevents accidental unlocking
- Two keys and labels included per padlock
Safety Padlock for Lockout Procedures
This Master Lock safety padlock uses a bright orange thermoplastic body for high visibility during lockout procedures. Each pack contains six keyed-alike units so a single key operates every padlock in the set. The shackle is made from hardened steel and measures 1/4 in diameter for a secure fit on standard lockout points. A non-removable key design prevents the key from being withdrawn while the shackle remains open.
Chemical Resistance and Low Thermal Conductivity
The thermoplastic body resists common industrial chemicals and does not conduct heat or electricity in the same way as metal bodies. This helps protect the user from accidental contact with energised or hot surfaces during maintenance. The hardened steel shackle maintains its strength under normal force while the plastic shell stays cool to the touch. No moving parts require lubrication, so routine noise is limited to the key turning in the cylinder.
Compact Form Factor for Tight Spaces
The 3/4 in body thickness and 1 1/2 in body width allow the padlock to fit into confined lockout points where bulkier models cannot reach. Horizontal and vertical shackle clearances of 13/16 in and 1 1/2 in respectively accommodate a range of hasp and chain sizes. Two keys and identification labels are included so each lock can be assigned to a specific authorised person. Builders needing a different shackle diameter or a master-keyed system will need a separate product line.
Highlights
- Keyed alike for fast lockout workflows
- Hardened steel shackle resists cutting attempts
- Thermoplastic body withstands chemical exposure
- Non-removable key prevents accidental unlocking
- Two keys and labels included per padlock
Specifications
| Brand | Master Lock |
|---|---|
| Type | Safety |
Questions about this item
How do I fit the 1/4 in shackle through my lockout hasp and what step is often missed?
Insert the hardened steel shackle through the hasp, close the padlock body until it clicks, then remove the key — the non-removable key design means the key stays trapped if you forget to pull it out before locking.
What part will need replacement first on this orange thermoplastic lockout padlock?
The two included keys are the only replaceable components; the hardened steel shackle and chemical-resistant thermoplastic body are built for the life of the lockout program.
At what point does the 13/16 in horizontal shackle clearance become the limiting factor during sustained lockout use?
When the isolation point has a narrower slot than 13/16 in, the shackle cannot pass through, so the lock cannot be applied regardless of how long the job runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
