Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00942429BTC
In stock
Master Lock
Master Lock Commercial Padlock 1-1/2 In H 4 Pin Boron Alloy
A commercial steel padlock with a 1-1/2 in shackle, four-pin cylinder and boron-alloy shackle for high-security applications
- TypeCommercial
- Commercial-grade security backed by 4-pin cylinder
- Long 1-1/2 in shackle clears thick hasps
- Boron-alloy shackle resists cutting and sawing
- Solid steel body withstands heavy impact
- Master K6000 keyway supports controlled keying systems
Commercial padlock for outdoor security
This Master Lock commercial padlock uses a boron-alloy steel body and a 3/8 in steel shackle with a 1 1/2 in clearance. Four pins and a Master K6000 keyway provide high-security locking for gates, sheds and storage units. The rectangular silver body measures 1 1/2 in high, 2 in wide and 1 in thick with two bumpers for durability. Each lock is keyed differently for individual access control.
Buyers needing weather resistance
This padlock is not weather resistant, so it suits covered or indoor locations rather than exposed marine or coastal sites. The core cannot be swapped or rekeyed, limiting use in master-keyed systems. Users who require a control key or registered key control should look elsewhere. The long shackle helps reach wider hasps but offers no shrouded protection against bolt cutters.
Simple shackle installation with fit checks
Open the lock with its unique key, slide the long shackle through the hasp or chain and snap it shut; no tools are required. The fixed 15/16 in internal width and 1 1/2 in shackle height mean you must verify the mounting points match before purchase. The non-rekeyable cylinder means a lost key requires full lock replacement.
Highlights
- Commercial-grade security backed by 4-pin cylinder
- Long 1-1/2 in shackle clears thick hasps
- Boron-alloy shackle resists cutting and sawing
- Solid steel body withstands heavy impact
- Master K6000 keyway supports controlled keying systems
Specifications
| Brand | Master Lock |
|---|---|
| Type | Commercial |
Questions about this item
What door hasp or chain thickness fits the 3/8 in shackle?
The shackle diameter is 3/8 in, so any hasp, chain link or staple with an opening larger than that will accept it.
Will the 1 1/2 in shackle height clear my existing thick gate frame?
The shackle provides 1 1/2 in of vertical clearance and 15/16 in between the legs, which suits most standard gate frames and thick hasps.
How do I confirm the lock is operating correctly after installation?
Insert the key, turn smoothly through the 4-pin Master K6000 cylinder, and verify the shackle releases and relocks without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
