Master Lock
Master Lock 410KABLU lockout padlock keyed alike blue thermoplastic 1 1/2 in
Blue thermoplastic lockout padlock with 1 1/2 in shackle, keyed alike for consistent access across multiple points
- TypeTraffic & Parking Lot
- Keyed-alike convenience simplifies multi-lock management
- Thermoplastic body resists chemicals in harsh environments
- Non-removable key prevents accidental unlocking during use
- Open shackle design allows quick attachment points
- Blue colour coding supports visual safety identification
Lockout padlock for keyed-alike safety systems
This Master Lock 410KABLU padlock is built for lockout programmes that require every lock in a set to open with the same key. Its blue thermoplastic body resists chemicals and measures one and a half inches wide with a one and three quarter inch height. The open shackle is one quarter inch thick and provides one and a half inches of vertical clearance.
Thermoplastic body resists chemicals
The non-conductive shell handles exposure to solvents and cleaning agents without corroding. A standard keyway and non-removable key design keep the key captive while the lock is open, preventing loss during shift changes. Metal shackle construction adds cut resistance while the body stays light.
Sustained use keeps key captive and shackle aligned
Under repeated lockout cycles the key remains in the cylinder until the shackle is secured, so operators cannot walk away with the key. The open shackle geometry maintains consistent alignment through hundreds of engagements. Chemical resistance preserves body integrity in harsh plant environments.
Highlights
- Keyed-alike convenience simplifies multi-lock management
- Thermoplastic body resists chemicals in harsh environments
- Non-removable key prevents accidental unlocking during use
- Open shackle design allows quick attachment points
- Blue colour coding supports visual safety identification
Specifications
| Brand | MASTER LOCK |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How do I install the 1 1/2 in thermoplastic body on a hasp, and which shackle clearance do people mix up?
Insert the 1/4 in metal shackle through the hasp and snap the body shut; the key stays trapped inside. The error is confusing the 13/16 in horizontal gap with the 1 1/2 in vertical gap — measure the hasp slot against the vertical figure.
What part will need replacement first on a 410 keyed-alike set used daily in a chemical area?
The shackle is metal while the body is chemical-resistant thermoplastic; the shackle will show corrosion or wear before the body degrades, so plan to replace the padlock when the shackle no longer slides freely.
At what point does the non-removable key become a problem during sustained lockout procedures?
Because the key cannot be removed while the padlock is open, every lockout cycle requires the authorised holder to be present; the limit appears when shift changes or multiple isolation points exceed the number of keys issued.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



