We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
8 inch black car speaker with silver magnet and cone visible

MASSIVE AUDIO

MASSIVE AUDIO MC8II 8" 600W 8 Ohm Car Speaker

SKU CH-CC0G-Z9Y4R

An 8-inch pro-audio midrange speaker handling 200 watts RMS and 600 watts peak at 8 ohms with 93 dB sensitivity

  • TypeSpeaker
  • Speaker Size0.5"
  • High SPL output with 98 dB sensitivity at 1 watt
  • 600 W peak power handling for loud, clean playback
  • 200 W RMS continuous rating for reliable daily use
  • 8 Ω impedance eases amplifier matching and wiring
  • 50 Hz – 20 kHz range covers mid-bass to high mids

Pro audio midrange speaker

The MASSIVE AUDIO MC8II is an 8-inch professional midrange speaker rated at 600 watts maximum power and 8 ohms impedance. It is built for car audio, stage and DJ installations where high output and durability are required. The cast aluminium basket and 60.5oz ferrite magnet provide a rigid platform for accurate reproduction.

Efficiency and thermal handling

The speaker achieves 98dB sensitivity at 1 watt and 1 metre, reaching 93dB in typical use across a 50Hz to 20KHz range. High efficiency means less amplifier power is converted to heat during extended high-SPL sessions. The Kapton coil former and vented extended core help dissipate thermal load during continuous operation.

Individually sold driver

Each unit is sold individually without grilles, crossovers or mounting hardware, allowing system designers to specify exact quantities and custom integration. The reinforced pressed paper cone and ultra-low resonance basket arrive ready for enclosure or door-panel installation. No software or signal processing is bundled.

Highlights

  • High SPL output with 98 dB sensitivity at 1 watt
  • 600 W peak power handling for loud, clean playback
  • 200 W RMS continuous rating for reliable daily use
  • 8 Ω impedance eases amplifier matching and wiring
  • 50 Hz – 20 kHz range covers mid-bass to high mids

Specifications

TypeSpeaker
Speaker Size0.5"

Questions about this item

How do I mount the 8-inch MC8II speaker and what step is often missed?

Bolt the cast aluminium basket through its mounting holes using the supplied hardware; the step many miss is torquing the bolts evenly so the pressed-paper cone stays centred and the 8 Ω impedance remains stable.

What part of the MC8II will need replacement first and when?

The rubber surround on the pressed-paper cone dries out after several years of high-SPL use; once it cracks, the 93 dB sensitivity drops and the speaker must be reconed or replaced.

At what power level does the MC8II hit its thermal limit during long sets?

Continuous RMS power above 200 W heats the Kapton coil former faster than the vented core can dissipate it, so sustained output should stay at or below the 200 W RMS rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.