We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PLA filament on a reusable spool, 1.75mm diameter

MarsWork PLA Basic Filament 1.75mm 2.2lbs Red With Spool 10303WS

SKU CH-Y8YZ-AQ39N

Pre-dried 1.75 mm PLA on a reusable quick-swap spool, pre-tuned for Bambu Lab presets and ready to print straight from the bag

  • ColorRed With Spool
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.2 pounds
  • Pre-dried and sealed under 0.3% moisture for immediate printing
  • Quick-swap reusable spool enables filament changes in seconds
  • Pre-tuned for Bambu Lab PLA Basic preset for reliable results
  • Consistent batch quality ensures repeatable print performance
  • 75mm diameter suits standard 3D printer extruders

PLA Basic 1.75 mm Red Filament

This MarsWork PLA Basic filament comes in a 2.2 lb spool of 1.75 mm red polylactic acid. It is triple-dried and sealed under .3 % moisture so it is ready to print immediately. The spool uses a quick-swap reusable design that lets you press, lift and change rolls in seconds while strapping half-used filament for tidy storage. It is aimed at hobbyists and makers who want a low-fuss material for everyday 3D printing projects.

Bambu Lab preset and dryer check

Before ordering, confirm that your printer can use 1.75 mm PLA and that you have a Bambu Lab machine or a slicer profile that matches the PLA Basic preset the filament is tuned for. Because the spool arrives pre-dried under .3 % moisture, you do not need an active filament dryer for the first print, but you should plan a dry storage method for any unused portion after opening the sealed bag.

Quick-swap spool and color card

The bundled reusable spool has a built-in clip and strap system that lets you store a partially used roll and swap to another colour without tangles. Color-card support on the spool helps you identify the material at a glance. These accessories remove the need for disposable cardboard spools and keep the workspace organized during multi-colour print sessions.

Highlights

  • Pre-dried and sealed under 0.3% moisture for immediate printing
  • Quick-swap reusable spool enables filament changes in seconds
  • Pre-tuned for Bambu Lab PLA Basic preset for reliable results
  • Consistent batch quality ensures repeatable print performance
  • 75mm diameter suits standard 3D printer extruders

Specifications

BrandMarsWork
Model10303WS
ColorRed With Spool
MaterialPolylactic Acid
Diameter1.75
Weight2.2 pounds

Questions about this item

Does the 2.2lbs Red filament include the reusable spool, or must the spool be purchased separately?

The MarsWork PLA Basic 10303WS ships on the reusable Quick-Swap spool, so the spool is included and nothing extra is required to start printing.

Should I choose the 1kg spool, the 250g refill, or the 250g*8 bundle for a Bambu Lab printer?

The 1kg spool on the reusable Quick-Swap spool is the simplest start for Bambu Lab printers; refills and bundles are for adding colours later without extra spools.

What does the under .3% moisture figure mean when the filament is loaded into my Bambu Lab printer?

The filament arrives triple-dried below .3% moisture, so it can go straight from the sealed bag into the Bambu Lab PLA Basic preset without additional drying.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.