We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white marine horn with sealed sound unit

Marinco

Marinco 12V MiniBlast Compact Single Horn White Cover marine electronic

SKU CH-YCSH-DXC14

A 12 V electric horn delivering 106 dB at one meter with a 430 Hz tone, corrosion-resistant ASA cover and 3 A draw

  • TypeAccessories
  • Compact 12 V horn fits existing 10035 cut-out
  • Loud 106 dB signal at one metre range
  • Corrosion-resistant ASA cover protects internal components
  • Sealed sound unit with stainless steel diaphragm endures salt spray
  • Low 3-amp draw preserves battery capacity

Compact 12 V marine horn

The Marinco MiniBlast is a compact single electric horn built for 12 V marine electrical systems. Its sealed sound unit uses a stainless steel diaphragm and a non-corrosive ASA plastic cover to withstand saltwater exposure. The unit produces a 106 dB(A) signal at one meter with a fundamental frequency of 430 Hz. It draws a maximum of 3 amps during operation.

Drop-in replacement for 10035 pattern

The horn mounts in the same hole pattern as the 10035 model, allowing a direct swap without new drilling. Overall dimensions are 4.375 inches long by 3.375 inches wide by 2 inches high, so it fits tight dash or bulkhead spaces. The sealed construction keeps moisture out of the driver, freeing the installer from additional waterproofing steps. A standard 12 V supply and a momentary switch are all that are required to complete the circuit.

Low draw and sealed acoustic unit

At 3 amps maximum the horn places minimal load on a boat's 12 V system and can share a fused circuit with other accessories. The sealed sound unit and ASA cover prevent corrosion that would otherwise degrade output or increase noise over time. In normal use the unit emits a clean 430 Hz tone at 106 dB(A) without mechanical rattle or electrical whine. No moving external parts mean there is no fan or bearing noise to consider.

Highlights

  • Compact 12 V horn fits existing 10035 cut-out
  • Loud 106 dB signal at one metre range
  • Corrosion-resistant ASA cover protects internal components
  • Sealed sound unit with stainless steel diaphragm endures salt spray
  • Low 3-amp draw preserves battery capacity

Specifications

TypeAccessories

Questions about this item

What is the maximum amp draw of the 12V MiniBlast horn during continuous operation?

The horn draws a maximum of 3 amps at 12 volts, so sustained use will not exceed this electrical load.

How loud is the MiniBlast horn and does it generate noticeable heat when running all day?

It produces 106 dB(A) at one meter with a 430 Hz tone; the sealed sound unit and ASA plastic cover dissipate heat without a fan, so noise is the primary output.

What existing mounting pattern must the boat already have for this horn to fit?

It uses the same hole pattern as the 10035 horn, so that specific cut-out must already be present on the vessel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.