We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical condenser mic on table stand with shock mount and pop filter

Maono PM325T 25mm condenser microphone XLR 3.5mm

SKU CH-7CAY-WARX9

A 25 mm condenser microphone with cardioid pickup, XLR-to-3.5 mm cable, shock mount, pop filter and table stand included

  • SpecificationWireless Unidirectional Tabletop Microphone
  • Polar PatternUnidirectional
  • Sensitivity45 decibels
  • Power SupplyCorded Electric
  • Weight1.628
  • Package Containscondenser mic*1, Shock Mount*1 , Table stand*1, Pop filter*1
  • 25 mm capsule captures detailed sound across 20 Hz to 20 kHz
  • Cardioid pattern rejects off-axis noise for cleaner recordings
  • Included shock mount absorbs vibration before it reaches the capsule
  • Pop filter and wind foam reduce plosives and breath sounds
  • XLR to 3.5 mm cable connects directly to computers and phones

25 mm condenser microphone for creators

The Maono PM325T is a large-diaphragm condenser microphone with a 25 mm capsule and a unidirectional cardioid pattern. It connects through an XLR to 3.5 mm cable for direct plug-in to computers, smartphones or the MaonoCaster audio interface series. The all-metal table stand, shock mount, pop filter and wind foam are included in the box.

Upgrade from built-in or headset mics

This model replaces basic laptop microphones or headset boom mics when clearer vocal capture is needed for podcasting, streaming, singing or voice-over work. The 25 mm diaphragm and 45 dB sensitivity deliver a flatter 20 Hz–20 kHz response than typical compact capsules. The jump is worth it when background rejection and consistent tone matter more than USB convenience.

Check phantom power and input socket

The PM325T requires phantom power, so verify that your interface, mixer or recorder supplies it before ordering. You also need an XLR input on the receiving device; the supplied cable ends in a 3.5 mm plug for consumer ports. No software drivers are required, but gain staging must be handled on the external preamp or interface.

Highlights

  • 25 mm capsule captures detailed sound across 20 Hz to 20 kHz
  • Cardioid pattern rejects off-axis noise for cleaner recordings
  • Included shock mount absorbs vibration before it reaches the capsule
  • Pop filter and wind foam reduce plosives and breath sounds
  • XLR to 3.5 mm cable connects directly to computers and phones

Specifications

BrandMaono
ModelPM325T
Part NumberPM325T
SpecificationWireless Unidirectional Tabletop Microphone
Polar PatternUnidirectional
Sensitivity45 decibels
Power SupplyCorded Electric
Weight1.628
Package Containscondenser mic*1, Shock Mount*1 , Table stand*1, Pop filter*1, Wind foam*1, XLR-3.5mm cable*1

Questions about this item

What desk space does the 1.628 kg table stand need?

The all-metal table stand and height-adjustable tube ship assembled; place the weighted base on any flat surface and tighten the tube clamp — no tools required.

How do I connect the XLR-3.5mm cable without a phantom power supply?

Plug the XLR end into the microphone and the 3.5 mm plug into your device; the mic draws power from the cable so no external supply is needed.

Which parts should I replace if the pop filter or wind foam wear out?

The package includes one pop filter and one wind foam cap; both slide off the shock mount and can be swapped for standard 25 mm replacements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.