Manw
Manw USB-C to Micro-USB Braided OTG Cable 2m 480Mbps Space Gray 6.6 FT
Connects USB-C hosts to Micro-USB devices for 480 Mbps data and 15 V 2.4 A charging with a 6.6 ft braided cable
- Connects USB-C host to Micro-USB devices for data and charge
- Braided 2 m cable supports USB 2.0 speeds up to 480 Mbps
- Delivers up to 15 V at 2.4 A for fast charging
- OTG function lets Type-C phones link directly to Micro-USB phones
- Wide compatibility with laptops, tablets, cameras, PS4 and more
USB-C to Micro-USB cable for legacy devices
This 2 metre braided cable connects a USB-C host such as a laptop to smartphones, tablets, cameras or hard drives that still use a Micro-USB port. It also enables OTG data or charging between a Type-C phone and a Micro-USB phone. The Space Grey finish matches modern notebooks.
Braided jacket and reinforced ends for daily carry
The nylon braid resists tangling and abrasion when the cable is coiled in a bag or plugged and unplugged repeatedly. Both connectors are moulded with strain relief so the junction survives frequent insertion without fraying. A 6.6 foot length gives desk reach without excess slack.
USB 2.0 speeds with up to 15 V 2.4 A charging
Data moves at up to 480 Mbps over the USB 2.0 interface, suitable for file sync and peripheral use. The cable carries up to 15 volts at 2.4 amps for charging supported devices. It runs cool and silent during normal operation because there are no active electronics in the cable itself.
Highlights
- Connects USB-C host to Micro-USB devices for data and charge
- Braided 2 m cable supports USB 2.0 speeds up to 480 Mbps
- Delivers up to 15 V at 2.4 A for fast charging
- OTG function lets Type-C phones link directly to Micro-USB phones
- Wide compatibility with laptops, tablets, cameras, PS4 and more
Specifications
| Brand | Manw |
|---|
Questions about this item
What data rate does the USB 2.0 interface cap at in practice?
The cable supports hi-speed USB 2.0 data transfer up to 480 Mbps.
What physical connectors are needed at each end?
One end is a USB-C male plug for the host, the other is a Micro-USB male plug for the device.
Which end must face the host when installing the OTG link?
The USB-C side is the host side; plug it into the computer or Type-C phone, then connect the Micro-USB end to the peripheral.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



