Manw
Manw SlimSAS 8X to SlimSAS 8X SFF-8654 74pin cable 70cm SAST-1267-85
SlimSAS 8X to SlimSAS 8X SFF-8654 74-pin cable, 70 cm length for high-density SAS links
- SlimSAS 8X connector enables high-speed SAS links
- SFF-8654 74-pin interface matches modern controller ports
- 70 cm length suits standard rack routing
- New condition guarantees unused factory quality
- SAST-1267-85 model identifies exact cable specification
SlimSAS 8X cable for SAS links
This Manw cable connects two SFF-8654 74-pin SlimSAS 8X ports over a 70 cm run. It is built for internal SAS links in servers and storage enclosures. The part carries model code SAST-1267-85 and is supplied new.
Suits builders wiring backplanes to RAID controllers
It fits any chassis that routes SAS lanes through the standard 8X SlimSAS connector. Installers who need a different pin count, a longer reach or an external bracket should look at another part. The fixed 70 cm length also rules out very compact or very wide layouts.
8X lane count carried by the SFF-8654 interface
Each end presents the full 8X lane group through the 74-pin connector, so the link width is set by this cable. Match the controller and backplane port type before ordering.
Highlights
- SlimSAS 8X connector enables high-speed SAS links
- SFF-8654 74-pin interface matches modern controller ports
- 70 cm length suits standard rack routing
- New condition guarantees unused factory quality
- SAST-1267-85 model identifies exact cable specification
Specifications
| Brand | Manw |
|---|
Questions about this item
Should I choose the 70 cm length or a different cable length for my build?
The 70 cm length suits typical server or workstation chassis where SlimSAS 8X ports are spaced within that reach; measure your routing path before ordering.
What does the 8X designation mean for actual throughput in a SAS system?
The 8X label indicates eight lanes; each lane runs at the SAS link speed of the connected controller, so aggregate bandwidth scales with that generation.
Does the SFF-8654 74-pin connector limit the cable to a specific SAS generation?
The SFF-8654 74-pin interface supports current SAS signalling rates; the practical ceiling is set by the host controller and drives, not the connector itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



