We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight Sata ports and a PCI Express connector

Manw

Manw PCIE Sata Add On Card 3.0 bedroom accent

SKU CH-CSRM-A0JDW

Adds eight SATA 3.0 ports through a single PCI Express slot for extra storage drives

  • PCI-E 1x interface adds eight Sata 3.0 ports
  • Expands storage capacity for HDD and SSD drives
  • Sata 3.0 controller supports 6 Gb/s data rates
  • CE certified for safety compliance
  • Low-profile add-on card fits standard expansion slots

PCI-E SATA expansion card

This Manw add-on card plugs into a single PCI Express 1x slot and provides eight SATA 3.0 ports for connecting additional hard drives or solid-state drives. It is suited for desktop builders who need more internal storage connections than the motherboard supplies. The controller operates at the 6 Gb/s SATA 3.0 rate for each attached drive.

Passive cooling and low power draw

The card uses a passive heatsink with no fan, so it adds no audible noise to the system. Power is drawn directly from the PCI Express slot without an external power connector, keeping cable routing simple and overall power consumption minimal during normal operation.

Compact bracket and standard connectors

A low-profile metal bracket fits standard and small-form-factor cases, and the eight right-angle SATA ports accept ordinary SATA data cables. No proprietary cables or adapters are required, so installation follows the usual drive-mounting workflow in any compatible chassis.

Highlights

  • PCI-E 1x interface adds eight Sata 3.0 ports
  • Expands storage capacity for HDD and SSD drives
  • Sata 3.0 controller supports 6 Gb/s data rates
  • CE certified for safety compliance
  • Low-profile add-on card fits standard expansion slots

Specifications

BrandManw

Questions about this item

How do I install the card in a PCI Express x1 slot and what step is often missed?

Insert the card into a free PCI Express x1 slot, secure the bracket screw, then connect each drive to one of the eight Sata ports; the step often missed is attaching the Sata power cables to every drive before booting.

What maintenance or replacement will the add-on card need over time?

The card itself has no moving parts and requires no scheduled maintenance; only the connected drives may eventually need replacement as they age.

What limit appears first when all eight Sata 3.0 ports run under sustained load?

The PCI Express x1 link caps total throughput at the lane’s maximum bandwidth, so that ceiling is reached before any individual Sata 3.0 port saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.