Manw
Manw 20cm 90° SATA Power Splitter 15Pin Male to 2×Female
A 20 cm Y-splitter converts one 15-pin SATA power port into two 90° right-angle female connectors for tight drive bays
- Converts one SATA power port into two independent outputs
- 90° downward female connectors prevent cable kinks in tight bays
- 20cm length optimizes internal routing without redundant slack
- High-purity copper conductors deliver stable 5V/12V power under load
- Plug-and-play design expands SATA power ports for storage upgrades
Splitter for Tight Drive Bays
This 20cm SATA power splitter converts a single 15Pin male connector into two 90-degree female ports. The right-angle design prevents cable kinks in narrow stacked bays. It suits builders adding drives where straight plugs cannot fit. No tools or drivers are required for installation.
Thermals and Power Stability
High-purity copper conductors deliver stable 5V and 12V lines with low voltage drop under heavy loads. The short 20cm length reduces resistance and keeps internal routing tidy. Angled connectors relieve strain on drive ports during long-term operation. The cable handles continuous power draw from multiple drives without added cooling.
One-to-Two Port Limitation
The Y-splitter provides exactly two female outputs from one male source. Systems needing three or more SATA power connections will require additional splitters or a PSU with more native ports. Each female port shares the single upstream circuit from the power supply. Builders planning large drive arrays should verify total port count first.
Highlights
- Converts one SATA power port into two independent outputs
- 90° downward female connectors prevent cable kinks in tight bays
- 20cm length optimizes internal routing without redundant slack
- High-purity copper conductors deliver stable 5V/12V power under load
- Plug-and-play design expands SATA power ports for storage upgrades
Specifications
| Brand | Manw |
|---|
Questions about this item
How do I install the 90° SATA power splitter without bending the cable?
Connect the 15Pin male plug to the PSU SATA power line, then press each 90° female port straight down onto the drive connectors; the downward angle prevents kinks in stacked bays.
Will the copper conductors need replacement after long-term heavy loads?
High-purity copper conductors are rated for stable 5V and 12V delivery; no scheduled replacement is required under normal desktop operation.
At what load does voltage drop become noticeable on the 20cm splitter?
The 20cm length keeps resistance low; voltage drop only appears when both drives draw near the PSU SATA rail's maximum current limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



