Manw
Manw 2-pack 6-inch down-angle SATA 15-pin male to dual female power splitter cable
Splits one SATA 15-pin power connector into two with compact down-angle female ends for tight chassis routing
- 2-pack provides spare cables for multiple drives
- 6-inch length keeps internal wiring short and tidy
- Down-angle female ports prevent cable bending in tight cases
- One 15-pin male plug splits power to two drives
- Thick copper conductors deliver stable current to SSD and HDD
2-pack 6-inch down-angle SATA power splitters
This two-piece set provides a straight 15-pin male plug and two down-angle female ports per cable. The short 6-inch length keeps internal wiring compact while doubling the available SATA power connections for solid-state drives and hard drives. Downward angled connectors reduce cable strain and help maintain a tidy chassis layout. Ideal for desktop storage expansion where space is limited.
Thermals noise and power draw
Passive copper conductors carry power without active cooling, so the cables add no audible noise to the system. Thick copper wire is specified to deliver stable current to each connected drive under normal operation. No fan, pump or semiconductor components are present that would generate heat or require additional power overhead. The splitters simply extend the existing power supply rails to two devices per cable.
Single 15-pin male input per cable
Each splitter accepts one standard SATA 15-pin power connector from the supply and branches it to two female ports. Builders needing more than two additional drives per cable must add further splitters or use a supply with extra native leads. The down-angle female orientation suits tight drive bays but may not align with upward-facing ports on some backplanes. Buyers who require right-angle male plugs or longer reach should look elsewhere.
Highlights
- 2-pack provides spare cables for multiple drives
- 6-inch length keeps internal wiring short and tidy
- Down-angle female ports prevent cable bending in tight cases
- One 15-pin male plug splits power to two drives
- Thick copper conductors deliver stable current to SSD and HDD
Specifications
| Brand | Manw |
|---|
Questions about this item
How do I install the down-angle SATA power splitter and what step is often missed?
Connect the straight 15-pin male plug to the PSU, then attach each down-angle female port to a drive; the step often missed is ensuring both female connectors click fully into the drive sockets before routing the short 6-inch cable.
What maintenance or replacement will the SATA power splitter need later?
Inspect the thick copper wires and down-angle connectors periodically for dust buildup or loose seating; replace the cable if any connector shows melted plastic, corroded pins, or intermittent power to the attached SSD or HDD.
What limit appears first when the SATA power splitter runs under sustained load?
The single 15-pin male input caps total current at the PSU rail rating, so the first limit is the shared power budget for both drives rather than the cable itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



