We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two flat black cables each with one 15-pin SATA plug splitting to five SATA sockets

Manw

Manw 2 Pack 21 Inches 15Pin SATA to 5-Port SATA Power Splitter Extension Cable

SKU CH-ASTG-6VYH3

Two 21-inch cables split one 15Pin SATA connector into five power ports for multi-drive arrays

  • Two cables give twelve SATA power ports for large arrays
  • One 15-pin SATA plug feeds five drives from a single PSU line
  • Twenty-one inch length reaches distant bays in full-tower cases
  • High-purity copper wiring keeps 5V and 12V rails steady under load
  • Works with every SATA hard drive, SSD and optical drive

Two-Pack SATA Power Splitter

This Manw set provides two identical cables that each turn a single 15Pin SATA power connector into five female SATA ports. The design lets one PSU line feed up to five drives, supporting large storage arrays in full-tower and server chassis. Plug-and-play operation requires no extra drivers or tools. The pair is suited for DIY workstations, RAID servers and multi-disk editing rigs.

Extended Reach for Large Cabinets

Each cable measures 21 inches, giving enough length to route power from a PSU to remote drive bays or stacked rack trays. High-purity copper wiring keeps 5V and 12V rails stable under sustained read-write loads, reducing voltage drop over the longer run. The extra reach replaces short factory cables that cannot span big cases or multi-bay enclosures. The upgrade is worthwhile when stock leads fall short of the furthest drive.

Suits Multi-Drive Builds Only

Builders populating five or more SATA drives from a single PSU connector will benefit from the split and the generous cable run. Systems with only one or two drives, or those using shorter standard cables, gain no advantage from the added length and splitter bulk. Buyers who need more than five ports per cable, or who require a different connector type, should look at alternative power distribution solutions.

Highlights

  • Two cables give twelve SATA power ports for large arrays
  • One 15-pin SATA plug feeds five drives from a single PSU line
  • Twenty-one inch length reaches distant bays in full-tower cases
  • High-purity copper wiring keeps 5V and 12V rails steady under load
  • Works with every SATA hard drive, SSD and optical drive

Specifications

BrandManw

Questions about this item

How much clearance does the 21-inch cable need behind the drive cage?

The 21-inch length provides enough slack to route around full-tower chassis and remote drive bays without sharp bends.

Which connector plugs into the PSU and how are the five outputs wired?

One 15Pin SATA male connector plugs into the PSU and splits into five independent SATA female ports for drives.

When should I inspect or replace the splitter cables?

Check connectors and wiring if drives show intermittent power loss or voltage instability under heavy loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.