Manw
Manw 15 Pin SATA Male to 6-Port SATA Female Power Splitter Cable Black
A single 15-pin SATA power connector splits into six female ports to run multiple drives from one PSU lead
- Single 15-pin SATA input powers six drives simultaneously
- Black outer jacket keeps cable routing tidy inside the chassis
- High-purity copper wiring maintains steady 12V and 5V delivery
- Universal SATA connectors fit every SATA-powered drive and accessory
- Molded splitter joints reinforce branches to resist wire breakage
Single 15Pin SATA power expansion
This cable converts one native 15Pin SATA male connector from the PSU into six separate SATA female power ports. It is built for RAID workstations, NAS enclosures and media editing rigs that need to run multiple drives from a limited number of PSU rails. High-purity copper wiring maintains steady 12V and 5V delivery across all branches under full multi-disk load. Molded split points reinforce each junction to prevent wire fatigue during repeated installs.
Builders needing simultaneous drive power
Suits integrators expanding storage arrays where the PSU lacks enough native SATA leads for every HDD, SSD or optical drive. The uniform black jacket keeps wiring tidy inside enclosed chassis and server racks. Not intended for setups that require mixed voltage rails beyond standard SATA specifications or configurations demanding individual port switching. Buyers needing more than six outputs must daisy-chain additional splitters.
Six-drive capacity with voltage headroom
Comfortably powers six SATA storage devices simultaneously for continuous read-write workloads such as bulk archiving or video editing scratch arrays. The reinforced splitter structure and abrasion-resistant insulation support long-duration operation inside hot enclosures. Headroom diminishes if the single PSU rail feeding the input cannot supply the combined 12V and 5V current demanded by all attached drives. No active regulation or per-port monitoring is provided.
Highlights
- Single 15-pin SATA input powers six drives simultaneously
- Black outer jacket keeps cable routing tidy inside the chassis
- High-purity copper wiring maintains steady 12V and 5V delivery
- Universal SATA connectors fit every SATA-powered drive and accessory
- Molded splitter joints reinforce branches to resist wire breakage
Specifications
| Brand | Manw |
|---|
Questions about this item
Does my power supply need a spare 15-pin SATA power connector to use this splitter?
Yes, the cable plugs into one native 15-pin SATA power output from the PSU and then provides six female SATA power ports for your drives.
Can I connect older SATA hard drives and SSDs to the six female ports without any adapter?
The six ports use the standard SATA power interface, so any SATA-powered HDD, SSD or optical drive will connect directly.
How can I verify the splitter is delivering stable power to all six drives after installation?
Check that every connected drive spins up and is recognised by the BIOS or operating system, confirming steady 12V and 5V supply across all ports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



