We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Manfrotto

Manfrotto RC Clamp LANC Remote MVR901ECLA .47–.9" clamp 55" cable

SKU CH-ZAPF-6MZH8

A LANC remote clamp that fits 0.47–0.9″ tubes, offering zoom/focus rocker, variable speed knob, record, power and autofocus buttons with LED status over a 55″ coiled cable

  • LANC control for Canon and Sony cameras
  • Quick-lock clamp fits .47 to .9 inch tubes
  • Rocker switches between zoom and focus modes
  • Side knob sets speed with pressure-sensitive override
  • 55 inch coiled cable with record and power buttons

Clamp LANC Remote for Canon/Sony

The Manfrotto RC Clamp LANC Remote MVR901ECLA attaches to tubes from .47" to .9" diameter and connects to LANC-equipped Canon and Sony video cameras. It is built for solo operators and small crews who need hands-on zoom, focus and record control without touching the camera body.

Thermals noise and power draw

The unit draws power directly from the camera through the 55" coiled LANC cable, so it adds no separate battery or heat source to the rig. Operation is silent because there are no motors or fans inside the remote itself.

Upgrade from camera buttons or basic remotes

This remote replaces on-camera menu diving and fixed-speed LANC remotes by adding a pressure-sensitive rocker with a side speed knob and a direction-reverse button. The jump is worth it when you need variable zoom or focus speed on a tripod arm, jib or gimbal where the camera controls are out of reach.

Highlights

  • LANC control for Canon and Sony cameras
  • Quick-lock clamp fits .47 to .9 inch tubes
  • Rocker switches between zoom and focus modes
  • Side knob sets speed with pressure-sensitive override
  • 55 inch coiled cable with record and power buttons

Specifications

No published specifications for this item yet.

Questions about this item

How do I attach the clamp to a tripod arm and what step is often missed?

Open the quick-lock clamp, slide it onto a tube between .47 and .9 inch diameter, then fully tighten the locking lever; the step often missed is confirming the lever clicks into the locked detent before use.

What part will need replacement first with regular use?

The coiled 55 inch LANC cable endures repeated flexing and is the component most likely to require replacement after extended service.

What limit appears first during a long shoot?

The clamp’s .47 to .9 inch diameter range is the first constraint; if your support tube falls outside that range the remote cannot be mounted securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.