Malco
Malco MALCOMBO11 2 in Impact Hex Driver Set 3pcs
Combo kit with three impact-grade hex drivers in 1/4, 5/16 and 3/8 inch sizes, each two inches long with floating magnets that resist impact stress
- Three impact-grade nut drivers in one combo kit
- 2-inch hex shanks fit standard impact drivers
- 1/4, 5/16 and 3/8 sizes cover common fasteners
- Floating magnet holds screws securely during use
- Designed to resist impact driver stress
Malco MALCOMBO11 Impact Hex Driver Set
This three-piece combo kit bundles one each of the MSH14IS, MSH516IS and MSH38IS impact-grade nut drivers. It is built for technicians and DIYers who drive hex fasteners with an impact driver and want a compact set covering common sizes. The 2-inch shank length on every piece keeps the work zone tight while still reaching recessed heads. Buyers needing a wider range of hex sizes or longer reach will need additional drivers.
Three Hex Shank Sizes in One Kit
The set supplies 1/4, 5/16 and 3/8 hex shanks, each 2 inches long, giving immediate coverage for many automotive and maintenance tasks. Impact-grade construction resists the high torque spikes that strip or shatter standard bits. The floating magnet holds fasteners securely without binding, speeding up repetitive driving. The fixed 2-inch length limits access in deep cavities where a longer extension would be required.
Unbreakable Floating Magnet Changes Daily Use
The floating magnet design grips the fastener but yields under side load, reducing cam-out and protecting both the bit and the work piece. Because the magnet is described as unbreakable, it survives drops and heavy impact cycles that damage conventional magnetic tips. No separate bit holder or magnetic sleeve is needed, so the kit stays minimal in a tool bag. Users who prefer a fixed-depth magnetic holder will find this behaviour different from traditional tips.
Highlights
- Three impact-grade nut drivers in one combo kit
- 2-inch hex shanks fit standard impact drivers
- 1/4, 5/16 and 3/8 sizes cover common fasteners
- Floating magnet holds screws securely during use
- Designed to resist impact driver stress
Specifications
| Brand | MALCO |
|---|
Questions about this item
Will these 2-inch impact hex drivers fit the 1/4-inch hex chuck on my older cordless drill?
Each driver has a standard 1/4-inch hex shank that seats securely in any 1/4-inch quick-change chuck, including older cordless drills and impact drivers.
How can I verify the floating magnets are holding fasteners properly once installed?
Place a nut or bolt on the driver tip; the unbreakable floating magnet should grip it firmly and release cleanly when you pull the fastener away.
Does the three-piece combo include all three nut-driver sizes or do I need to buy any separately?
The kit supplies one 1/4-inch, one 5/16-inch and one 3/8-inch impact-grade nut driver — every size listed is in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
