We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PLA filament spool with translucent hub, 1.75 mm diameter

MakerBot

MakerBot True Green PLA Filament 1.75mm Large Spool 0.9kg

SKU CH-0WQA-HHEJH

PLA filament in True Green, 1.75 mm diameter on a 0.9 kg spool for MakerBot Replicator 5th-Generation, Z18 and Replicator 2 printers

  • ColorTrue Green
  • MaterialPLA plastic
  • Diameter1.75 mm
  • Compatible SystemMakerBot Replicator 5th-Generation MakerBot Replicator Z18 M
  • FeaturesGlass Temperature: 140 - 149°F / 60 - 65°C Melting Temperatu
  • Weight2.0 lbs. / 0.9 kg
  • True Green colour gives vivid prints
  • 75 mm diameter fits listed MakerBot printers
  • 9 kg spool supports long print jobs
  • PLA prints at 230 °C nozzle temperature
  • Glass transition at 60–65 °C for stable parts

True Green PLA for MakerBot printers

This 1.75 mm PLA filament comes in a True Green colour and is supplied on a 0.9 kg spool. It is designed for use with MakerBot Replicator 5th-Generation, Replicator Z18 and Replicator 2 systems. Makers and educators who need consistent extrusion for classroom or prototype work will find it matches those machines directly.

Spool dimensions and thermal profile

The spool measures 9.84 inches in diameter, 1.57 inches wide and has a 2.00 inch hub hole, fitting the standard holder on the listed printers. Glass temperature sits between 140 and 149°F, melting temperature between 302 and 320°F, and the recommended nozzle temperature is 446°F. These figures help operators set up profiles without trial runs.

Replaces smaller reels for longer prints

The 0.9 kg capacity replaces lighter spools that require frequent changes during extended builds. The jump is worth it when print jobs exceed the run length of a standard cartridge or when fewer material swaps are needed to maintain workflow. Users with printers outside the three named models should verify diameter and hub compatibility before purchasing.

Highlights

  • True Green colour gives vivid prints
  • 75 mm diameter fits listed MakerBot printers
  • 9 kg spool supports long print jobs
  • PLA prints at 230 °C nozzle temperature
  • Glass transition at 60–65 °C for stable parts

Specifications

BrandMakerbot
ModelMP05952
ColorTrue Green
MaterialPLA plastic
Diameter1.75 mm
Compatible SystemMakerBot Replicator 5th-Generation
MakerBot Replicator Z18
MakerBot Replicator 2
FeaturesGlass Temperature: 140 - 149°F / 60 - 65°C
Melting Temperature: 302 - 320°F / 150 - 160°C
Nozzle Temperature: 446°F / 230°C
Spool Diameter: 9.84" / 25.00 cm
Spool Width: 1.57" / 4.00 cm
Spool Hub Hole: 2.00" / 5.08 cm
Weight2.0 lbs. / 0.9 kg

Questions about this item

What nozzle temperature does the 1.75 mm PLA require?

The filament prints at a nozzle temperature of 446°F / 230°C.

Will the 9.84" spool fit on a holder with a 2.00" hub hole?

Yes, the spool hub hole is 2.00" / 5.08 cm, matching that holder size.

How do I load the filament into a Replicator 2 without grinding?

Preheat the nozzle to 230°C, then feed the 1.75 mm filament until it extrudes cleanly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.