We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green ABS filament on an 8-inch spool, 1.75 mm diameter

MakerBot

MakerBot True Green ABS Filament 1.75 mm 1 kg

SKU CH-4GGJ-SR44H

1.75 mm True Green ABS filament on a 1 kg spool, tested for MakerBot Replicator 1, Replicator 2X and Thing-O-Matic Stepstruder MK6+ printers

  • ColorTrue Green
  • MaterialABS plastic
  • Diameter1.75 mm
  • Melting Point1Amorphous, no "true" melting point
  • Compatible SystemMakerBot 3D Printers: Replicator 1 Replicator 2X Thing-O-Mat
  • FeaturesSpool Diameter: 8 in Spool Width: 3 in Spool Hub Hole: 2 in
  • True Green colour for vibrant prints
  • 75 mm diameter fits compatible MakerBot printers
  • ABS plastic withstands 105 °C glass temperature
  • Nozzle temperature 230 °C ensures reliable extrusion
  • 1 kg spool supplies ample material for projects

MakerBot True Green ABS Filament 1.75 mm

This spool delivers one kilogram of True Green ABS plastic in a 1.75 mm diameter. It is built for owners of MakerBot Replicator 1, Replicator 2X or Thing-O-Matic Stepstruder MK6+ machines who need a reliable supply of green material. The reel dimensions are 8 inches in diameter and 3 inches wide with a 2 inch hub hole. Nozzle temperature is set at 230 °C and glass temperature at 105 °C.

Suited to MakerBot desktop printers listed above

Makers using the named Replicator and Thing-O-Matic models can load this filament directly. Users of other 3D printers, or those who require a different filament diameter, a different colour, or a non-ABS material such as PLA or PETG, should look elsewhere. The amorphous melting behaviour means there is no single melting point to reference.

1.75 mm diameter on an 8 inch spool

The 1.75 mm width and the 8 inch spool diameter with a 2 inch hub hole are the critical fit factors for the compatible MakerBot systems. If your printer accepts only a different filament width or cannot accommodate the stated spool dimensions, this reel will not work. Always verify the nozzle temperature capability of 230 °C before purchasing.

Highlights

  • True Green colour for vibrant prints
  • 75 mm diameter fits compatible MakerBot printers
  • ABS plastic withstands 105 °C glass temperature
  • Nozzle temperature 230 °C ensures reliable extrusion
  • 1 kg spool supplies ample material for projects

Specifications

BrandMakerbot
ModelMP01972
ColorTrue Green
MaterialABS plastic
Diameter1.75 mm
Melting Point1Amorphous, no "true" melting point
Compatible SystemMakerBot 3D Printers:
Replicator 1
Replicator 2X
Thing-O-Matic Stepstruder MK6+ and Up
FeaturesSpool Diameter: 8 in
Spool Width: 3 in
Spool Hub Hole: 2 in
Glass Temperature: 221° F / 105° C
Melting Temperature: Amorphous (no true melting point)
Nozzle Temperature: 446° F / 230° C
Weight2.20 lbs. (1 kg)

Questions about this item

Which diameter should I pick for my MakerBot Replicator 2X, 1.75 mm or 1.8 mm?

The spool is manufactured to 1.75 mm; the 1.8 mm figure in the title is a loose reference, so use the 1.75 mm spec when setting up the printer.

What nozzle temperature does the 230 °C spec translate to in everyday printing?

Heat the hot-end to 230 °C (446 °F) for reliable layer adhesion with this ABS formulation.

Does the amorphous melting behaviour change the glass-transition setting of 105 °C?

No — the bed should still be held at 105 °C (221 °F) to keep the first layers from warping despite the amorphous melt characteristic.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.