MAIWO
MAIWO USB 3.0 M.2 SATA Enclosure Silver Grey 2230 2242 2260 2280
Houses a single M.2 SATA SSD (2230–2280) in a pocket-sized aluminium case with a built-in USB 3.0 Type-A plug for 5 Gbps data access
- ColorSilver Grey
- TypeEnclosure
- MaterialAluminum
- External Interfacetype A
- HDD Count SupportedSingle SSD
- Number of Bay1 Bay
- Tool-free 5 Gbps SATA access via integrated USB 3.0 plug
- Aluminium shell dissipates heat from 2230 to 2280 M.2 drives
- Works on Windows, Linux and macOS without drivers
- Pocket-size 12.6 × 4.05 × 0.95 cm design weighs 80 g
- Protective cap shields the USB-A connector during transport
USB 3.0 M.2 SATA enclosure
The MAIWO enclosure turns a single M.2 SATA B+M key SSD into a USB 3.0 drive. It accepts 2230, 2242, 2260 and 2280 form factors up to 2 TB. The integrated Type A plug removes the need for a separate cable. It is not for users who need NVMe or PCIe SSD support.
Aluminium shell and portable size
An aluminium body measuring 12.6 by 4.05 by 0.95 cm and weighing 80 g acts as a passive heatsink. A plastic cap protects the USB interface when the unit is not in use. The flash-drive format fits in a pocket for transport. No active cooling or fan is present.
Driver-free cross-platform use
The device works with Windows, Linux and macOS without installing drivers. Backward compatibility with USB 2.0 at 480 M/s ensures function on older ports. The bundled cap shields the connector from dust and damage during storage.
Highlights
- Tool-free 5 Gbps SATA access via integrated USB 3.0 plug
- Aluminium shell dissipates heat from 2230 to 2280 M.2 drives
- Works on Windows, Linux and macOS without drivers
- Pocket-size 12.6 × 4.05 × 0.95 cm design weighs 80 g
- Protective cap shields the USB-A connector during transport
Specifications
| Color | Silver Grey |
|---|---|
| Type | Enclosure |
| Material | Aluminum |
| External Interface | type A |
| HDD Count Supported | Single SSD |
| Number of Bay | 1 Bay |
Questions about this item
How do I install a 2280 M.2 SATA B+M key SSD into the MAIWO enclosure and which step do people often miss?
Slide the SSD into the M.2 slot at an angle, press it flat, and secure it with the screw; the step often missed is confirming the drive is a SATA B+M key model — NVMe, PCIe AHCI, mSATA or B-key-only SATA drives will not work.
What maintenance or replacement will this enclosure need over time?
The aluminium shell acts as a heatsink with no moving parts, so no routine maintenance is required; only the protective cap on the USB 3.0 Type-A plug may need replacing if it is lost or damaged.
What is the first performance limit I will hit during sustained transfers?
The USB 3.0 interface caps throughput at 5 Gbps, so sustained sequential reads and writes cannot exceed that bandwidth even if the SATA SSD itself is faster.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
