We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue arcade joystick with black base and 35 mm ball top

Magik Costumes

Magik Costumes 5Pin 4/8 Way Arcade Joystick Blue

SKU CH-BBT6-F6DSQ

A 35 mm ball-top joystick offering 4- or 8-way operation with spring return-to-center and microswitches rated for 1,000,000 cycles

  • ColorBlue
  • Competition-grade 4- or 8-way control for precise input
  • 35 mm ball top gives firm grip during play
  • Spring return-to-centre keeps movement consistent
  • Microswitches rated to 1000000 cycles for long life
  • 5-pin terminal simplifies wiring in DIY builds

Blue Competition Joystick 5-Pin

This Magik Costumes arcade joystick delivers competition-grade control for DIY cabinet builds. It mounts securely into both wood and metal panels and uses a spring-return mechanism that snaps the stick back to centre after every move. A 35 mm ball top provides a familiar grip for classic and modern arcade titles. Microswitches are rated for 1,000,000 actuations.

DIY Cabinet Builders and Retro Enthusiasts

The 5-pin terminal layout suits hobbyists wiring their own harnesses or encoder boards. Buyers who need a plug-and-play USB solution should look elsewhere, as no cable or controller board is included. The 4-way and 8-way gate options cover most golden-age and fighting-game layouts, but pure analog or optical requirements are not met.

5-Pin Terminal Microswitch Interface

Connection is made through five screw terminals on the microswitch assembly, so the installer must provide matching wiring and an input encoder. This single interface detail determines whether the joystick integrates with the chosen control board. Cable is not supplied.

Highlights

  • Competition-grade 4- or 8-way control for precise input
  • 35 mm ball top gives firm grip during play
  • Spring return-to-centre keeps movement consistent
  • Microswitches rated to 1000000 cycles for long life
  • 5-pin terminal simplifies wiring in DIY builds

Specifications

ColorBlue

Questions about this item

How does the 5-pin terminal connect to a DIY arcade control board?

The five pins carry the four directional switches plus a common ground, so you solder or crimp each wire to the matching input on your encoder or PCB.

What panel thickness and hole size does the blue joystick flange require for a secure mount?

The flange is drilled for standard bolts and fits wood or metal control panels; a 35 mm diameter hole clears the ball and actuator.

Which step do builders most often skip when switching between 4-way and 8-way modes?

Rotate the restrictor plate until the notch aligns with the desired mode, then tighten the retaining screws before reassembling the panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.