We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white Magicard Pronto100 single-sided card printer with hand-fed slot

Magicard

Magicard Pronto100 Single-Sided Card Printer 3100-0001/2

SKU CH-HW8E-MEK9G MPN 3100-0001/2

Prints single-sided ID cards at 300 dpi using dye sublimation, thermal transfer and HoloKote watermarking, with colour output in 23 seconds and monochrome in 4.7 seconds

  • Weight15.0000
  • Prints full-colour cards in 23 seconds using dye sublimation
  • Produces monochrome cards in 4.7 seconds via thermal transfer
  • Adds visible security with HoloKote watermarks and HoloPatch support
  • Rewritable technology lets you erase and reprint cards
  • Feeds CR-80 and CR-79 cards through a single hand-fed slot

Magicard Pronto100 ID Card Printer

The Magicard Pronto100 is a single-sided card printer designed for small businesses and groups that need on-demand identification cards. It uses dye sublimation and thermal transfer technology to produce colour or monochrome cards with edge-to-edge coverage. The unit includes HoloKote watermarking and rewritable card support for visible security features. A hand-fed input slot accepts one card at a time.

Installing the Pronto100 via USB

Connect the printer to a host computer using the supplied USB cable and install the driver from the manufacturer. The hand-fed slot means no hopper alignment is required, but users must insert each card manually for every print job. Misfeeds usually happen when cards are bent or inserted at an angle. Rewritable cards need the correct ribbon setting or the erase cycle will fail.

300 dpi single-sided print resolution

The printer outputs at 300 dpi, which determines the sharpness of text, photos and barcodes on the finished card. Colour cards take 23 seconds each while monochrome cards take 4.7 seconds. It accepts CR-80 and CR-79 format cards only. Buyers who need dual-sided printing or higher throughput should look elsewhere.

Highlights

  • Prints full-colour cards in 23 seconds using dye sublimation
  • Produces monochrome cards in 4.7 seconds via thermal transfer
  • Adds visible security with HoloKote watermarks and HoloPatch support
  • Rewritable technology lets you erase and reprint cards
  • Feeds CR-80 and CR-79 cards through a single hand-fed slot

Specifications

BrandMagicard
Weight15.0000
Shipping weight6.80 kg
Package size483 × 406 × 356 mm

Questions about this item

How can I confirm the Pronto100 is printing correctly after setup?

Print a test card and verify the 300 dpi output shows sharp text and accurate colours using the HoloKote watermark feature.

What comes in the box with the 3100-0001/2 and what must I buy separately?

The printer includes a hand-fed single card input slot and USB cable; you must purchase colour or monochrome ribbons and CR-80 or CR-79 cards separately.

Which version of the Pronto100 should I choose for single-sided ID cards?

The 3100-0001/2 model is the single-sided version that prints colour cards in 23 seconds and monochrome in 4.7 seconds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.