Madison
Madison Multi-Level Liquid Level Switch 2 in NPT Selectable SS
A selectable-function liquid level switch with 316 stainless-steel stem and floats, 2 in NPT mounting, 200 psi rating and 60 VA contact capacity
- TypeLight Switch
- Selectable switch function adapts to multiple level points
- 2 in NPT stainless steel stem fits standard tank openings
- 316 stainless steel floats and stem resist corrosion at 392 °F
- SPST contacts rated .5 A at 240 V for reliable switching
- 46 in overall length with adjustable stem suits deep tanks
2 in NPT selectable liquid level switch
This Madison switch monitors liquid levels in open tanks using a vertical 2 in NPT connection. The 316 stainless steel stem and floats handle temperatures up to 392 degrees F and pressures up to 200 psi. Selectable SPST contacts simplify wiring for pump-up or pump-down control.
60 VA rating and adjustable stem length
The switch carries 0.5 A at 240 V for direct control of small pumps or relays. An overall length of 46 in and adjustable stem provide flexibility for tank depths up to that limit. Floats measure 2.13 in diameter and 2.1 in length for reliable buoyancy.
316 stainless steel construction
All wetted parts use 316 stainless steel for corrosion resistance in water, oils and many chemicals. The 43.19 in width and 2 in conduit fitting support secure installation in standard tank openings. No external controller or power supply is included.
Highlights
- Selectable switch function adapts to multiple level points
- 2 in NPT stainless steel stem fits standard tank openings
- 316 stainless steel floats and stem resist corrosion at 392 °F
- SPST contacts rated .5 A at 240 V for reliable switching
- 46 in overall length with adjustable stem suits deep tanks
Specifications
| Brand | Madison |
|---|---|
| Type | Light Switch |
Questions about this item
Will the 2 in NPT connection fit the existing tank opening I already have?
The switch mounts vertically through a 2 in NPT tank connection, so it will thread directly into a matching opening without adapters.
How can I verify the SPST contacts are switching at the correct liquid levels after installation?
With power applied, observe the circuit open and close as the float rises and falls through each set point; the selectable function lets you confirm normally-open or normally-closed action at each level.
Does the package include the conduit fitting or must I supply a 2 in conduit separately?
The unit is built with a 2 in conduit size on the stainless-steel body; a separate conduit fitting is not included and must be sourced to match your wiring run.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



