We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent octal-base relay with eight pins and LED indicator, 1.7 by 2.4 by 2.9 inches

Macromatic

Macromatic ARP120A6R 120V AC 10A 8-pin alternating relay

SKU CH-567A-KV7B7

An 8-pin octal alternating relay with SPDT contacts rated 10 A at 240 V AC or 24 V DC, operating on 120 V AC with LED status indication

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • LED shows next load to energise
  • Alternates between two loads automatically
  • 10 A contact rating at 240 V AC
  • Plug-in 8-pin octal base for quick mounting
  • 120 V AC coil with under 3 VA burden

Industrial alternating relay

The Macromatic ARP120A6R is an 8-pin plug-in relay designed for alternating two loads in industrial control panels. It operates on a 120V AC coil and provides a single SPDT contact set rated at 10 A for both 240V AC and 24V DC switching. A built-in LED indicates which load is next to energise.

Sustained load behaviour

The relay draws less than 3 VA burden and consumes 3 VA during continuous operation, keeping coil heating low inside enclosed cabinets. Its alternating mode energises load one and load two in sequence each time the control signal cycles, preventing one device from accumulating excessive run time. The transparent housing allows visual confirmation of the LED status without removing the cover.

Decisive specification

The 8-pin octal base and 120V AC coil voltage determine whether this relay fits an existing socket and control circuit. Builders using a different pin count, coil voltage or contact arrangement will need a different part. The selector switch for alternating mode is fixed on the unit and cannot be reprogrammed for single-load duty.

Highlights

  • LED shows next load to energise
  • Alternates between two loads automatically
  • 10 A contact rating at 240 V AC
  • Plug-in 8-pin octal base for quick mounting
  • 120 V AC coil with under 3 VA burden

Specifications

BrandMACROMATIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How much heat and power does the 120 V AC coil draw when the relay runs continuously?

The coil consumes less than 3 VA, which equals 3 watts of heat, so it stays cool during all-day operation.

What socket or base must I already have to plug in this 8-pin octal relay?

You need a standard 8-pin octal socket wired for 120 V AC coil voltage.

Will the 10 A contacts switch the same 240 V AC or 24 V DC loads that my existing contactors handle?

Yes — the SPDT contacts are rated 10 A at 240 V AC and 10 A at 24 V DC, matching those older loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.