We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mackie

Mackie MATHUMP212 12" 1400W studio monitor

SKU CH-VCXX-CP8QE MPN MATHUMP212

A portable 12" powered PA loudspeaker with a built-in 2-channel mixer, combo XLR-1/4" inputs, 3.5mm aux input, feedback eliminator, music ducking, limiters, and a pole cup for stand mounting

  • Portable 12" powered speaker for live sound applications
  • 1400W amplification drives clear output for audiences
  • Two-channel mixer with gain controls handles mic and line sources
  • Built-in limiters and feedback eliminator protect the system
  • Angled cabinet with pole cup doubles as floor monitor

Portable PA for Live Sound

The Mackie Thump212 is a 12 inch powered loudspeaker system rated at 1400W, built for live sound reinforcement. It suits singer-songwriters, small club PA setups, boardrooms, classrooms and A/V presentations. The angled cabinet also allows use as a floor monitor for onstage performance.

Thermal and Power Behaviour

The Class D amplifier delivers 1400W peak output while built-in limiters protect the system from overload during extended use. The polypropylene enclosure dissipates heat passively without a cooling fan, keeping acoustic noise low in quiet venues. Power draw scales with output level rather than idling high.

Mixer and Connectivity Benefits

A 2-channel mixer provides two combo XLR-1/4 inch inputs with independent gain controls for mic or line sources. Channel 2 adds a 3.5mm stereo aux input for portable playback devices. An XLR thru output carries the summed mix to daisy-chain additional speakers. Music ducking automatically lowers playback volume when a microphone signal is detected, and the feedback eliminator reduces unwanted resonance. A pole cup on the base enables mounting on a standard speaker stand.

Highlights

  • Portable 12" powered speaker for live sound applications
  • 1400W amplification drives clear output for audiences
  • Two-channel mixer with gain controls handles mic and line sources
  • Built-in limiters and feedback eliminator protect the system
  • Angled cabinet with pole cup doubles as floor monitor

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect a microphone and a phone to the two combo XLR-1/4" inputs and the 3.5mm aux on the Thump212?

Plug the mic into channel 1's combo jack, set its gain, then connect the phone to channel 2's 3.5mm TRS aux; the mixer sums both to the internal amp and the XLR thru output.

What part will need attention after heavy gigging on the Mackie Thump212?

The polypropylene cabinet resists impacts, but the pole cup threads and combo jack latches should be checked periodically for wear from repeated stand mounting and cable insertion.

At what output level does the built-in limiter engage on the 1400W Thump212?

The limiter activates automatically when the amplifier approaches its 1400W peak rating, preventing driver overload during sustained high-SPL passages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.