M.A. Ford
M.A. Ford Twister Xd Drill 12X-25X Coolant Fed 5.00mm
Twister Xd coolant-fed drill delivers 12X-25X performance for 5.00mm holes
- Twister Xd design drills 12X-25X diameter depths with coolant feed
- 00 mm diameter suits precise hole-making in metal
- Coolant-fed operation extends tool life and improves chip evacuation
- M.A. Ford manufacturing delivers consistent performance for demanding applications
- California Proposition 65 warning indicates chemical hazard awareness required
5 mm coolant-fed drill for deep holes
The M.A. Ford Twister Xd drill has a 5.00 mm diameter and a 12X to 25X flute length. Coolant channels deliver fluid directly to the cutting zone. It is built for CNC machines that need accurate deep-hole drilling.
Suited for CNC deep-hole work; not for hand drills
Machinists running CNC centres with through-spindle coolant gain the full benefit. Shops without coolant-fed spindles cannot use the internal channels. Buyers needing larger diameters or different flute ratios must select another tool.
5.00 mm diameter decides fit
The single specification that determines whether this drill matches the job is the 5.00 mm cutting diameter. Verify the hole size required by the drawing before ordering.
Highlights
- Twister Xd design drills 12X-25X diameter depths with coolant feed
- 00 mm diameter suits precise hole-making in metal
- Coolant-fed operation extends tool life and improves chip evacuation
- M.A. Ford manufacturing delivers consistent performance for demanding applications
- California Proposition 65 warning indicates chemical hazard awareness required
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 12X-25X range mean for the Twister Xd drill?
The 12X-25X designation indicates the drill's length-to-diameter ratio capability, allowing deep-hole drilling from 12 to 25 times the 5.00 mm diameter in a single pass.
What machine spindle or holder is required for the 5.00 mm Twister Xd drill?
The 5.00 mm shank fits standard ER collets, hydraulic chucks, or shrink-fit holders sized for 5 mm; the coolant-fed design requires a through-spindle or through-holder coolant supply.
How is the coolant-fed Twister Xd drill installed, and what step is often missed?
Mount the drill in a precision holder with the shank fully seated, then verify coolant flows through the internal channels before starting the spindle; skipping the flow check is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
