M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 7.80mm 2XDCL3071A
Coolant-fed drill creates precise 7.80 mm holes with efficient chip removal
- Twister Xd 7X+ design enables high-performance drilling
- 80 mm diameter suits precise hole-making tasks
- Coolant-fed operation improves tool life and chip evacuation
- M.A. Ford quality ensures reliable industrial performance
- California Proposition 65 compliance informs safe handling practices
7.80mm Twister Xd 7X+ drill
The M.A. Ford Twister Xd 7X+ is a 7.80mm coolant-fed drill built for high-performance holemaking in demanding materials. It targets machinists and production shops that need precise, deep-hole capability with internal coolant delivery. The tool suits CNC operations where chip evacuation and thermal control are critical for part quality.
Shank fit and coolant setup
Installation requires a compatible tool holder that matches the drill shank and a machine spindle capable of delivering high-pressure coolant through the tool body. Verify the holder seals correctly to prevent coolant leakage at the interface. Misaligned coolant ports or insufficient pressure typically cause premature wear or hole quality issues.
Deep-hole stability and heat control
Under sustained cutting the internal coolant channel flushes chips continuously, maintaining stable cutting temperatures at the drill point. This reduces thermal expansion and helps hold diameter tolerance over long production runs. The design resists deflection in deep holes where external coolant alone cannot reach the cutting zone effectively.
Highlights
- Twister Xd 7X+ design enables high-performance drilling
- 80 mm diameter suits precise hole-making tasks
- Coolant-fed operation improves tool life and chip evacuation
- M.A. Ford quality ensures reliable industrial performance
- California Proposition 65 compliance informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the 7.80 mm coolant-fed drill is cutting correctly after installation?
Verify the drill runs true at the spindle, check that coolant flows steadily through the internal channels, and measure the hole diameter to confirm it matches the 7.80 mm spec.
What comes with the Twister Xd 7X+ drill and what must I supply separately?
The package contains the 2XDCL3071A drill bit only; you must provide a compatible tool holder, coolant supply, and machine spindle.
Which version of the Twister Xd 7X+ should I choose for a 7.80 mm hole?
Select the 2XDCL3071A model, which is manufactured specifically for a 7.80 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
