M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 7.00 mm
Coolant-fed drill bit with 7.00 mm diameter for deep-hole drilling applications
- 00 mm diameter suits precise drilling tasks
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance noted for safety awareness
M.A. Ford Twister Xd 7X+ Drill
This M.A. Ford Twister Xd 7X+ is a coolant-fed drill built for precision hole-making in demanding materials. It serves machinists and engineers who require accurate 7.00 mm diameter results with effective heat management during operation.
Upgrade from standard non-coolant drills
The internal coolant channel replaces conventional external flood cooling, delivering lubricant directly to the cutting zone. This jump is worth it when deep-hole drilling or high-temperature alloys cause standard drills to overheat and wear prematurely.
7.00 mm capacity with deep-hole headroom
The 7.00 mm diameter handles production runs in steel and exotic alloys where chip evacuation and tool life are critical. It runs out when the application demands a larger diameter or a length-to-diameter ratio beyond the flute design.
Highlights
- 00 mm diameter suits precise drilling tasks
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance noted for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size and coolant feed does the 7.00 mm Twister Xd 7X+ require?
The drill has a 7.00 mm diameter and is designed for through-coolant delivery, so the holder must accept that shank size and provide a sealed coolant path.
How is the 2XDCL2756A installed in a CNC spindle, and what step is often missed?
Insert the drill into a compatible coolant-fed holder, torque to the holder manufacturer's spec, then verify coolant flows through the internal channels before starting the cycle.
When should the 7.00 mm Twister Xd 7X+ be replaced or reconditioned?
Replace or send for regrind when flank wear reaches the toolmaker's limit, when hole diameter drifts out of tolerance, or when coolant flow drops due to internal blockage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
