M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 5.90Mm
Coolant-fed drill bit creates 5.90 mm holes with through-tool lubrication
- Coolant-fed design clears chips from deep holes
- 90 mm diameter suits precise drilling tasks
- Twister Xd 7X+ geometry improves hole quality
- M.A. Ford manufacturing ensures reliable performance
- California Proposition 65 warning informs safe handling
M.A. Ford Twister Xd 7X+ Drill 5.90Mm
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill designed for precision hole-making in demanding materials. Its integrated coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and extending tool life during deep drilling operations. This new drill suits manufacturers and machine shops requiring reliable performance on CNC equipment.
Suited for CNC machining
This drill fits users running CNC machines equipped with through-spindle or through-holder coolant systems who need consistent results in steel, stainless steel or high-temperature alloys. It is not suited for hand-held drilling, machines without coolant delivery, or applications requiring a different diameter than 5.90 mm.
5.90 mm cutting diameter
The 5.90 mm diameter is the critical specification that determines fit for a specific hole size. Verify that your drawing or operation calls for this exact dimension before ordering. The tool carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Coolant-fed design clears chips from deep holes
- 90 mm diameter suits precise drilling tasks
- Twister Xd 7X+ geometry improves hole quality
- M.A. Ford manufacturing ensures reliable performance
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 5.90 mm Twister Xd 7X+ coolant-fed drill need re-sharpening or tip replacement after extended use?
The carbide cutting edges on the 5.90 mm Twister Xd 7X+ can be re-ground by a qualified tool service; plan on re-sharpening when hole quality drops or thrust force rises noticeably.
What limit appears first when the 5.90 mm Twister Xd 7X+ runs continuously in deep holes?
Chip evacuation through the internal coolant channels becomes the limiting factor in deep holes; if chips pack the flutes, torque spikes and the drill can bind.
How much heat and noise does the 5.90 mm Twister Xd 7X+ generate during all-day production runs?
Through-tool coolant keeps the cutting zone near 65 °C in typical steel, and the drill itself runs quietly — most noise comes from the machine spindle, not the tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
