M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 5.00Mm
A coolant-fed drill bit with a 5.00 mm diameter for deep-hole drilling
- 00 mm coolant-fed drilling depth
- Twister Xd 7X+ geometry for chip evacuation
- M.A. Ford precision manufacturing quality
- California Proposition 65 compliance labelling
- New condition ready for immediate use
M.A. Ford Twister Xd 7X+ Coolant Fed Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill designed for precision holemaking. It targets machinists and maintenance teams who need reliable performance in metalworking applications. The 5.00 mm diameter suits a range of standard drilling tasks. New condition ensures full factory specification from first use.
Suited for coolant-fed drilling operations
This drill suits workshops with coolant delivery systems that can utilise the internal channels for chip evacuation and temperature control. It is not for buyers who lack through-coolant capability on their machine spindles. Operators needing a different diameter or a non-coolant-fed geometry should look at alternative tooling. The Prop 65 notice indicates chemical content requiring safe handling procedures.
5.00 mm diameter with coolant-fed design
The defining specification is the 5.00 mm cutting diameter combined with the coolant-fed construction. This pairing determines whether the tool matches the hole size and machine coolant requirements of the job. Verify both parameters against your process needs before selection. Manufacturer part number 2XDCL1968A identifies this exact configuration.
Highlights
- 00 mm coolant-fed drilling depth
- Twister Xd 7X+ geometry for chip evacuation
- M.A. Ford precision manufacturing quality
- California Proposition 65 compliance labelling
- New condition ready for immediate use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
At what drill depth does the 5.00 mm flute length become the limiting factor during sustained drilling?
The 5.00 mm flute length limits effective chip evacuation once the hole exceeds that depth, requiring frequent peck cycles to prevent clogging.
How much heat builds up in the 2XDCL1968A body when running coolant-fed cycles all day?
Continuous coolant flow through the internal channels keeps the cutting zone near stable temperature, preventing excessive heat soak in the tool body.
Which machine spindle interface is required to mount the Twister Xd 7X+ shank?
A standard cylindrical shank fits common ER collets, Weldon flats or hydraulic holders — match the holder bore to the shank diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
