M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 4.80Mm
Coolant-fed drill bit creates 4.80 mm holes with internal lubrication delivery
- Coolant-fed design clears chips during deep drilling
- Twister Xd 7X+ geometry improves hole accuracy
- 80 mm diameter suits precise metalworking tasks
- M.A. Ford manufacturing ensures professional-grade durability
- California Proposition 65 warning informs safe handling practices
Precision coolant-fed drilling
The M.A. Ford Twister Xd 7X+ is a solid-carbide drill designed for high-performance holemaking in demanding materials. Internal coolant channels deliver lubricant directly to the cutting zone for consistent chip evacuation and temperature control. It targets machinists and production engineers who need repeatable accuracy on CNC equipment.
4.80 mm diameter with advanced geometry
The 4.80 mm cutting diameter suits precise pilot-hole and through-hole operations in steel, stainless alloys and high-temperature metals. Twister Xd 7X+ flute geometry promotes straightness and surface finish while reducing thrust force. Coolant-fed design minimises thermal distortion during deep or high-speed cycles.
Ships free from the manufacturer
The drill arrives new and ready for immediate use in tool holders or spindles compatible with its shank specification. Direct manufacturer shipment reduces handling steps and lead time for production planning. California Proposition 65 notices apply to chemical content in the tool substrate or coating.
Highlights
- Coolant-fed design clears chips during deep drilling
- Twister Xd 7X+ geometry improves hole accuracy
- 80 mm diameter suits precise metalworking tasks
- M.A. Ford manufacturing ensures professional-grade durability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank interface does the 2XDCL1890A Twister Xd use, and what diameter does it cap at?
The drill uses a coolant-fed shank that matches a 4.80 mm cutting diameter, so the interface caps at that size.
What physical clearance does the 4.80 mm coolant-fed drill need in the holder?
The tool requires a holder or collet bored for a 4.80 mm shank with an internal coolant channel.
How is the 2XDCL1890A installed, and what step is often missed?
Insert the drill into a coolant-compatible holder, torque to the maker’s spec, then verify coolant flows through the tool before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
