M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 4.60mm
A 4.60 mm coolant-fed drill designed for high-performance drilling applications
- 60 mm diameter for precise hole sizing
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enhances drilling performance
- M.A. Ford quality ensures reliable professional results
- California Proposition 65 compliance disclosed for safety awareness
Twister Xd 7X+ coolant-fed drill, 4.60 mm
This M.A. Ford Twister Xd 7X+ drill is a coolant-fed cutting tool with a 4.60 mm diameter. It is engineered for high-performance drilling in demanding industrial environments. The design delivers coolant directly to the cutting zone for improved chip evacuation and tool life. It suits precision machining operations that require consistent hole quality.
For CNC shops needing through-coolant drilling
This drill suits CNC machinists who need a 4.60 mm coolant-fed tool for high-efficiency metal removal. It is not for operators without through-spindle coolant capability on their machines. Buyers who require a different diameter or a non-coolant-fed geometry should look at something else. Manual drilling applications cannot use this tool effectively.
The single specification is the 4.60 mm
The 4.60 mm diameter with internal coolant delivery is the specification that decides fit. Your machine must support through-coolant at this exact size for the drill to function as intended. Verify the toolholder and spindle interface match this requirement before ordering. No other dimension or feature overrides this compatibility check.
Highlights
- 60 mm diameter for precise hole sizing
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enhances drilling performance
- M.A. Ford quality ensures reliable professional results
- California Proposition 65 compliance disclosed for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the M.A. Ford Twister Xd 7X+ coolant-fed drill and what step do users often miss?
Mount the 4.60 mm drill in a compatible coolant-fed holder, then connect the coolant supply before starting the spindle; the step most often missed is verifying coolant flow at the tip before cutting.
What maintenance or replacement will the M.A. Ford Twister Xd 7X+ drill need later?
Inspect the cutting edges and coolant passages after each job; replace the drill when flank wear reaches the manufacturer’s limit or if internal coolant channels become blocked.
What limit appears first on the M.A. Ford Twister Xd 7X+ drill during sustained use?
The 4.60 mm diameter and coolant-fed design mean thermal buildup at the cutting zone typically becomes the limiting factor before tool deflection or holder slip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
