M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 2XDCL2420A C
Coolant-fed Twister Xd drill delivers 7X+ performance for deep-hole drilling applications
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enables high-performance drilling
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance informs safe handling practices
- New condition guarantees full factory performance from first use
Twister Xd 7X+ coolant-fed drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill built for precision hole-making in metalworking environments. It targets machinists and maintenance teams who need consistent chip evacuation and tool life when drilling deep or difficult materials. The design supports high-performance drilling cycles where flood coolant alone is insufficient. Buyers who need a standard non-coolant twist drill will not use this specialised tool.
Coolant-fed design changes chip control
Internal coolant delivery directs fluid to the cutting edges, improving chip breaking and evacuation in deep-hole applications. This reduces the risk of chip packing and heat buildup that can damage the workpiece or the tool. The feature supports higher feed rates and longer uninterrupted runs compared with external coolant only. Operations without through-spindle coolant capability cannot use this drill as intended.
2420 model designation identifies the variant
The 2XDCL2420A part number specifies this exact drill configuration within the Twister Xd 7X+ range. Selecting the correct designation ensures compatibility with the required holder, coolant system and machining programme. Verifying the model code against the setup sheet prevents costly tooling errors. No other size or grade information is provided in the data.
Highlights
- Coolant-fed design improves chip evacuation and tool life
- Twister Xd 7X+ geometry enables high-performance drilling
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance informs safe handling practices
- New condition guarantees full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should the coolant-fed drill tip be inspected or replaced?
Inspect the cutting edges after each shift; replace when flank wear reaches the manufacturer limit or when hole quality drops.
What limits continuous drilling depth on this 7X+ coolant-fed drill?
The 7X+ length-to-diameter ratio sets the maximum unsupported drilling depth before deflection affects accuracy.
How much heat builds up in the drill body during all-day production runs?
Through-tool coolant flow evacuates heat from the cutting zone, keeping the shank temperature stable during extended cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
