M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 11.50Mm
Coolant-fed Twister Xd 7X+ drill creates precise 11.50 mm holes with internal lubrication
- 50 mm diameter suits precise drilling tasks
- Coolant-fed design removes heat during deep cuts
- Twister Xd 7X+ geometry improves chip evacuation
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning lists chemical hazards
M.A. Ford Twister Xd 7X+ Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill designed for precision hole-making in industrial applications. It features a 11.50 mm cutting diameter and carries the manufacturer part number 2XDCL4527A. This tool is built for professional machining environments where controlled coolant delivery improves chip evacuation and extends tool life during deep-hole drilling operations.
For CNC machining and high-volume production
This drill suits operators running CNC machines with through-spindle coolant capability who need consistent performance in steel, stainless steel, or high-temperature alloys. It is not for manual drilling, portable drill presses, or machines without internal coolant supply. Buyers needing non-coolant-fed geometries or different diameters should consider other tooling.
11.50 mm coolant-fed cutting diameter
The 11.50 mm diameter with integrated coolant channels is the defining specification for hole-size accuracy and process compatibility. This dimension determines whether the drill matches the required hole tolerance and fits the programmed tool path. Verify the machine spindle and holder accept this shank configuration before purchase.
Highlights
- 50 mm diameter suits precise drilling tasks
- Coolant-fed design removes heat during deep cuts
- Twister Xd 7X+ geometry improves chip evacuation
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning lists chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the M.A. Ford Twister Xd 7X+ coolant-fed drill and what step is commonly missed?
Secure the 11.50 mm drill in a rigid holder, connect coolant through the tool's internal channels, and verify flow before starting; the step most often missed is confirming coolant reaches the tip at operating pressure.
What maintenance or replacement will the 2XDCL4527A drill need over time?
Inspect the cutting edges after each job; resharpen or replace the drill when flank wear exceeds acceptable limits or when coolant holes show blockage that cannot be cleared.
What limit appears first on the Twister Xd 7X+ during sustained drilling?
The 11.50 mm diameter and 7X+ length-to-diameter ratio make chip evacuation the first constraint; inadequate coolant pressure or speed causes packing that stops the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
