M.A. Ford
M.A. Ford Twister XD 5X Solid Carbide Drill 9.60 mm
Solid carbide drill bit with five-times-diameter reach for deep holes at 9.60 mm diameter
- Solid carbide construction resists wear for longer tool life
- 5X diameter flute design enables deeper holes in one pass
- 60 mm diameter suits precise drilling applications
- Twister XD geometry improves chip evacuation during operation
- M.A. Ford manufacturing ensures professional-grade reliability
Twister XD 5X Solid Carbide Drill 9.60 mm
The M.A. Ford Twister XD 5X is a solid carbide drill bit sized at 9.60 mm. It belongs to the Twister XD series designed for high-performance drilling in demanding materials. The tool targets professional machinists and maintenance technicians who need reliable holemaking in tough alloys.
Upgrade from standard carbide or cobalt drills
This bit replaces general-purpose carbide or cobalt drills when longer tool life and faster penetration are required. The 5X diameter design supports deeper holes without pecking. The jump is justified when cycle time and regrind intervals become costly on high-volume or difficult-to-machine workpieces.
Suited for CNC and rigid manual drilling
The geometry suits rigid CNC setups and stable manual machines cutting hardened steels and high-temperature alloys. Shops without through-coolant capability or those drilling softer materials like aluminium or plastic will not benefit from the specialised edge preparation and should consider alternative drill styles.
Highlights
- Solid carbide construction resists wear for longer tool life
- 5X diameter flute design enables deeper holes in one pass
- 60 mm diameter suits precise drilling applications
- Twister XD geometry improves chip evacuation during operation
- M.A. Ford manufacturing ensures professional-grade reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter fits the 9.60 mm Twister XD drill?
The 9.60 mm drill uses a standard shank that matches the drill diameter for direct collet or chuck clamping.
How is the Twister XD drill installed and what step is often missed?
Clamp the shank fully in a clean collet or drill chuck, then verify run-out before cutting; skipping the run-out check causes premature wear.
When does the solid carbide drill need replacement?
Replace the drill when flank wear reaches the recommended limit or when cutting forces and hole quality noticeably degrade.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
