M.A. Ford
M.A. Ford Twister XD 5X Solid Carbide Drill 7.80mm 2XDSR3071A
Solid carbide drill bit creates 7.80 mm holes with five-times-diameter reach
- 80 mm diameter fits precise drilling tasks
- Twister XD 5X design supports high-performance drilling
- Solid carbide construction resists wear and heat
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning informs safe handling
7.80mm solid carbide drill
The M.A. Ford Twister XD 5X is a solid carbide drill with a 7.80mm cutting diameter. It is intended for machinists and maintenance teams who need a rigid, long-life tool for producing accurate holes in steel and other ferrous alloys.
Fits standard drill holders
The shank is designed for conventional drill chucks and collet systems, so no special adapters are required. The main installation risk is excessive run-out in a worn holder, which can chip the carbide cutting edges and reduce hole quality.
Verify coolant and speed capability
Before ordering, confirm that your machine can deliver the coolant pressure or flood flow recommended for solid carbide drills and that the spindle speed range matches the diameter. Also check that the workpiece clamping is rigid enough to prevent vibration during the drilling cycle.
Highlights
- 80 mm diameter fits precise drilling tasks
- Twister XD 5X design supports high-performance drilling
- Solid carbide construction resists wear and heat
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I verify the Twister XD 5X drill is cutting correctly after installation?
Check that the 7.80mm hole diameter matches the specification and that chips evacuate cleanly without excessive heat or vibration during drilling.
What comes in the box with the 2XDSR3071A drill and what must I purchase separately?
The package contains the solid carbide drill only; a compatible tool holder, coolant supply and workpiece clamping are not included and must be sourced separately.
Which Twister XD version should I choose for a 7.80mm hole in hardened steel?
Select the 2XDSR3071A model with 5X diameter-to-length ratio, designed for high-performance drilling in tough materials at the 7.80mm size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
