M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 7.50 mm
Solid carbide drill creates precise 7.50 mm holes with five-times-diameter reach
- Solid carbide construction resists wear for longer tool life
- 5× diameter flute length enables deeper holes in a single pass
- 50 mm cutting diameter suits standard metric drilling tasks
- Twister Xd geometry improves chip evacuation and hole quality
- California Proposition 65 warning indicates regulated substances present
M.A. Ford Twister Xd 5X Drill 7.50 mm
The M.A. Ford Twister Xd 5X is a solid carbide drill designed for precision hole-making in demanding materials. It suits machinists and maintenance technicians who require reliable performance in high-temperature alloys and hardened steels. The 7.50 mm diameter addresses specific metric sizing requirements.
Sustained cutting in tough alloys
Solid carbide construction maintains hardness at elevated temperatures generated during deep-hole drilling. The Twister Xd geometry promotes efficient chip evacuation to prevent binding during continuous operation. This design supports consistent feed rates without premature edge breakdown.
7.50 mm diameter defines the fit
The 7.50 mm cutting diameter is the critical specification determining compatibility with the target hole size. Select this drill only when the drawing or process calls for this exact metric dimension. California Proposition 65 warnings apply regarding chemical exposure.
Highlights
- Solid carbide construction resists wear for longer tool life
- 5× diameter flute length enables deeper holes in a single pass
- 50 mm cutting diameter suits standard metric drilling tasks
- Twister Xd geometry improves chip evacuation and hole quality
- California Proposition 65 warning indicates regulated substances present
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat or vibration does the 7.50 mm Twister Xd 5X generate during continuous drilling?
The solid carbide construction runs cooler than HSS drills and the 5X flute design evacuates chips efficiently, reducing friction and heat buildup during extended use.
What tool holder or machine spindle is required for the 7.50 mm Twister Xd 5X?
It fits any standard 7.50 mm drill chuck or collet on a drill press, milling machine or CNC with sufficient rigidity for carbide tooling.
Will the 2XDSR2953A Twister Xd 5X work reliably in an older drill press with run-out?
Carbide is less tolerant of run-out than HSS; ensure the spindle and chuck are true, otherwise consider a more forgiving high-speed steel drill for that machine.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
