M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 6.80Mm
Solid carbide drill with 5x diameter depth capability for 6.80 mm holes
- Solid carbide construction resists wear for longer tool life
- 5x diameter drilling depth reaches deeper holes in one pass
- 80 mm diameter matches precise metric hole requirements
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 warning informs safe handling practices
Twister Xd 5X 6.80Mm drill
The M.A. Ford Twister Xd 5X is a solid carbide drill built for high-performance drilling in demanding materials. It serves machinists and maintenance teams who need reliable holemaking with extended tool life.
5X diameter capacity and headroom
The 6.80Mm diameter suits precise production drilling where rigidity and accuracy are critical. The 5X length-to-diameter ratio provides reach for deeper holes while the solid carbide construction resists deflection and wear in tough alloys.
Solid carbide practical limits
Solid carbide delivers hardness and heat resistance that support higher speeds than high-speed steel. The material brittleness requires stable fixturing and rigid machine spindles to prevent breakage under interrupted cuts or excessive runout.
Highlights
- Solid carbide construction resists wear for longer tool life
- 5x diameter drilling depth reaches deeper holes in one pass
- 80 mm diameter matches precise metric hole requirements
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 6.80 mm Twister Xd 5X carbide drill fit the chuck on my existing drill press?
The 6.80 mm shank matches standard chuck capacities on most pillar drills and bench presses, so it seats securely without an adapter.
How can I verify the 2XDSR2677A drill is cutting correctly after the first hole?
Check for a clean, round hole at 6.80 mm diameter with minimal burr and consistent chip evacuation — signs the carbide geometry is performing as designed.
Does the box include cutting fluid or only the 2XDSR2677A drill itself?
Only the solid-carbide Twister Xd 5X drill is supplied; coolant or cutting fluid must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
