M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 2.30mm Pneumatic Accessory
A solid carbide drill bit sized at 2.30 mm for pneumatic drilling applications
- Solid carbide construction resists wear for long tool life
- 5× diameter drilling depth reaches deeper holes in one pass
- 30 mm diameter suits precise small-hole applications
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 warning discloses regulated chemical content
Twister Xd 5X 2.30 mm Solid Carbide Drill
This M.A. Ford drill bit is built for high-performance drilling in tough materials. It suits machine shops and maintenance teams that need precise, repeatable holes with a 2.30 mm diameter. The solid carbide construction resists wear during extended production runs. It is a pneumatic accessory designed for demanding industrial applications.
Check shank fit and coolant setup
Verify that your tool holder accepts the drill shank before ordering. Confirm that your machine can deliver the required coolant flow and pressure for carbide tooling. Ensure the workpiece clamping is rigid enough to prevent vibration at high speeds. Review the safety data sheet for the Proposition 65 listed chemicals.
Replaces worn carbide or cobalt drills
Swap out dull solid carbide or cobalt drills when hole quality drops or cycle times rise. The upgrade is worth it when tighter tolerances and longer tool life cut overall cost per hole. It does not suit applications needing larger diameters or different flute geometries. Buyers who need coated variants or step drills should look elsewhere.
Highlights
- Solid carbide construction resists wear for long tool life
- 5× diameter drilling depth reaches deeper holes in one pass
- 30 mm diameter suits precise small-hole applications
- Twister Xd geometry improves chip evacuation during drilling
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes in the box and do I need to buy a holder or collet separately?
The package contains the 2.30 mm solid-carbide Twister Xd 5X drill; a compatible collet or drill chuck is not included and must be sourced separately.
The supplier title shows 2XDSR0906A — does the 906 indicate a different length or coating I should choose?
906 is the manufacturer's catalogue code for this 2.30 mm, 5× diameter drill; no alternative length or coating variants are listed for this item.
What does the 5X designation mean for hole depth in my machine?
5X means the flute length allows drilling up to five times the 2.30 mm diameter in a single pass, subject to machine rigidity and coolant.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
