M.A. Ford
M.A. Ford Twister XD 5X Solid Carbide Drill 15.50 mm 2XDSR6102A
Solid carbide drill with a 15.50 mm diameter for high-precision drilling tasks
- Solid carbide construction resists wear at 15.50 mm diameter
- Twister XD 5X geometry improves chip evacuation in deep holes
- 5X length-to-diameter ratio extends reach for through-hole drilling
- M.A. Ford manufacturing quality ensures consistent hole accuracy
- Prop 65 notice included for California regulatory compliance
Application fit
The M.A. Ford Twister XD 5X is a solid carbide drill sized at 15.50 mm for high-performance holemaking in tough materials. It suits production shops and maintenance teams that need repeatable accuracy and long tool life. Buyers who require a different diameter, a coated variant, or an indexable system will need another product.
Installation and common issues
The drill fits standard tool holders that accept a 15.50 mm shank, so setup is a direct clamp-and-run operation. Problems usually arise from insufficient coolant flow, incorrect feed rates for the workpiece material, or worn holder collets that allow run-out and premature wear.
Interface limits
The tool operates within the mechanical limits of a rigid tool-holding interface and the spindle power available on the machine. Performance drops if the holder cannot maintain concentricity or if the machine lacks the torque to sustain the required cutting parameters at this diameter. The California Proposition 65 notice applies to the product.
Highlights
- Solid carbide construction resists wear at 15.50 mm diameter
- Twister XD 5X geometry improves chip evacuation in deep holes
- 5X length-to-diameter ratio extends reach for through-hole drilling
- M.A. Ford manufacturing quality ensures consistent hole accuracy
- Prop 65 notice included for California regulatory compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I confirm the Twister XD 5X 15.50 mm drill is cutting correctly after installation?
Check for consistent chip formation, steady feed force, and hole diameter within tolerance for the 15.50 mm size
What comes in the package with the 2XDSR6102A drill and what must I source separately?
The solid carbide drill is supplied alone; a compatible tool holder, coolant supply, and workpiece clamping are not included
Which version of the Twister XD 5X should I select for a 15.50 mm hole?
Choose the 15.50 mm variant identified by part number 2XDSR6102A for that exact diameter
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
