M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 15/32
A solid-carbide Twister XD drill with 5×D capability for 15/32-inch holes
- 5x diameter drilling depth for fewer tool changes
- 15/32 inch diameter suits common hole sizes
- Solid carbide construction resists wear in tough materials
- Twister Xd geometry improves chip evacuation
- California Proposition 65 warning for chemical awareness
Solid Carbide Drill 15/32
The M.A. Ford Twister Xd 5X is a solid carbide drill bit sized at 15/32 inch. It is built for machinists and maintenance teams who need a durable cutting tool for general-purpose drilling in metal.
5X Diameter Drilling Depth
The bit follows a 5X diameter design, meaning its flute length allows holes up to five times the nominal diameter in a single pass. This specification determines whether the tool reaches the required depth without peck cycles.
Standard Shank Install
The drill fits any collet or chuck that accepts a 15/32 inch shank, so setup is a simple clamp-and-run operation. The main risk is chip packing in deep holes if coolant pressure or peck intervals are not adjusted for the material.
Highlights
- 5x diameter drilling depth for fewer tool changes
- 15/32 inch diameter suits common hole sizes
- Solid carbide construction resists wear in tough materials
- Twister Xd geometry improves chip evacuation
- California Proposition 65 warning for chemical awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What hole size does the 15/32 inch drill produce in a workpiece?
The 15/32 inch diameter matches the nominal hole size for standard fractional drilling applications in metal and other materials.
What shank standard does the Twister Xd 5X drill use and what does it limit?
The solid carbide construction with a common shank fits standard drill chucks and collets, limiting use to holders that accept the nominal shank diameter.
What physical dimensions determine if this 15/32 drill fits my machine?
The 15/32 inch cutting diameter and overall length define the clearance and spindle capacity required for proper mounting and drilling depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
