M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 11.50Mm
Solid carbide drill provides 5x diameter depth capability for 11.50 mm holes
- Twister Xd 5X geometry drills five diameters deep
- Solid carbide construction resists wear in tough materials
- 50 mm diameter suits precise hole-making
- M.A. Ford brand backs professional-grade performance
- California Proposition 65 notice informs safe handling
Product identity
The M.A. Ford Twister Xd 5X is a solid carbide drill sized at 11.50 mm. It is built for machinists and maintenance teams who need a rigid, long-lasting cutting tool for deep-hole work in steel and alloys. The 5× diameter flute length supports extended reach without a pilot drill.
Installation and common issues
The shank fits standard collets and hydraulic holders used on CNC mills and lathes. Run-out must be checked after clamping because excessive eccentricity causes premature corner breakdown. Insufficient coolant pressure or incorrect feed rates often lead to chip packing and tool fracture.
Practical limits of the standard
Solid carbide construction delivers high wear resistance but low toughness compared with cobalt or indexable alternatives. The 5× length-to-diameter ratio limits straightness in cross holes or interrupted cuts. The tool is not suited for hand-held drilling or materials that generate built-up edge without through-coolant capability.
Highlights
- Twister Xd 5X geometry drills five diameters deep
- Solid carbide construction resists wear in tough materials
- 50 mm diameter suits precise hole-making
- M.A. Ford brand backs professional-grade performance
- California Proposition 65 notice informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I verify the Twister Xd 5X drill is cutting correctly after installing it in my machine?
Check that the 11.50 mm diameter produces a clean hole within tolerance and that the solid carbide tip shows no chipping after the first few cycles.
What comes in the package with the M.A. Ford 2XDSR4527A drill and what must I source separately?
The box contains the 11.50 mm Twister Xd 5X solid carbide drill only; you will need a compatible tool holder, coolant supply and workpiece clamping.
Which version of the Twister Xd 5X should I select for an 11.50 mm hole?
Choose the 2XDSR4527A model listed as 11.50 mm; no other diameter or length variants are offered for this part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
