M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 10.70mm
Solid carbide drill cuts 10.70 mm holes in tough materials with five-times-diameter reach
- Solid carbide construction resists wear for longer tool life
- 5X diameter design enables deeper holes in a single pass
- 70 mm diameter suits precise drilling applications
- Twister Xd geometry improves chip evacuation and hole quality
- Manufactured by M.A. Ford for professional-grade reliability
Solid carbide drill for tough materials
The M.A. Ford Twister Xd 5X is a solid carbide drill built for high-performance drilling in demanding alloys and hardened steels. Its 5x diameter flute length suits production runs where hole depth and accuracy matter. Professional machinists and maintenance teams select it for consistent results in difficult materials.
Heat resistance and cutting stability
Solid carbide construction handles the elevated temperatures generated in deep-hole drilling without losing edge integrity. The Twister Xd geometry promotes efficient chip evacuation, reducing the risk of binding and excess power draw on the machine spindle. Stable cutting action keeps vibration and noise at manageable levels during extended cycles.
10.70 mm diameter for precise hole sizing
The 10.70 mm cutting diameter determines the final hole size, making this the critical specification for tool selection. Shops requiring a different diameter must choose another variant, as this drill cannot be resized. The fixed 5x length-to-diameter ratio also limits reach for deeper holes.
Highlights
- Solid carbide construction resists wear for longer tool life
- 5X diameter design enables deeper holes in a single pass
- 70 mm diameter suits precise drilling applications
- Twister Xd geometry improves chip evacuation and hole quality
- Manufactured by M.A. Ford for professional-grade reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How is the 10.70mm Twister Xd 5X drill installed and what step do users often get wrong?
Secure the 10.70mm drill in a precision collet or drill chuck, then verify run-out before starting; the step often missed is checking concentricity at the tip.
What maintenance or replacement will the 2XDSR4213A carbide drill need later?
The solid carbide body cannot be resharpened economically; replace the drill when flank wear reaches the margin or when hole quality drops.
What limit appears first on the Twister Xd 5X during sustained drilling?
Heat buildup at the cutting edges is the first limit; without through-coolant the 10.70mm drill loses hardness faster than chip evacuation becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
