M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 9.80Mm 2XDCR3858A
A coolant-fed drill bit with a 9.80 mm diameter for deep-hole drilling
- 5x diameter reach for deeper holes
- 80 mm cutting diameter for precise sizing
- Coolant-fed design improves chip evacuation
- Twister Xd geometry enhances drilling performance
- M.A. Ford manufacturing ensures professional quality
Product Identity
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a new cutting tool designed for precision drilling tasks. It targets machinists and maintenance professionals who require accurate hole production in metalworking applications. The 9.80 mm diameter suits specific fastener or clearance requirements.
Critical Specification
The defining feature is the 5X coolant-fed design that delivers lubricant directly to the cutting zone through the tool body. This internal delivery improves chip evacuation and extends tool life when drilling deeper holes. Buyers must verify their machine spindle supports through-coolant operation before purchasing.
Suitability Guidance
This drill suits workshops with coolant-capable machining centres or lathes running dedicated drilling cycles. It is not for buyers who need a hand-held twist drill or lack through-spindle coolant capability. Shops requiring different diameters or non-coolant-fed geometries should look at other tooling options.
Highlights
- 5x diameter reach for deeper holes
- 80 mm cutting diameter for precise sizing
- Coolant-fed design improves chip evacuation
- Twister Xd geometry enhances drilling performance
- M.A. Ford manufacturing ensures professional quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X coolant-fed rating mean for drilling performance?
The 5X rating indicates this drill can operate at five times the diameter depth with internal coolant delivery, allowing deeper holes in a single pass without chip packing or overheating.
How does the coolant-fed design affect the tool interface?
Internal coolant channels run through the shank and flute, requiring a machine spindle or holder that supplies coolant through the tool rather than external flood cooling.
What shank dimensions are needed to mount the 9.80 mm drill?
The 9.80 mm cutting diameter requires a matching 9.80 mm collet, hydraulic holder or shrink-fit chuck with internal coolant capability for proper clamping and coolant sealing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
